Struck by object falling from vehicle or machinery-other than vehicle part · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at TMS International, LLC , 12400 Hwy 43 N, AXIS, ALABAMA 36505
on — Fractures, affecting the leg(s), unspecified.
Final narrative
An employee was welding and constructing a steel cage from six 1,400-pound steel plates. He was guiding a steel plate from a forklift into position when the chains holding the steel plate slipped off the forklift forks and the 5' x 5' steel plate broke his right leg.
HospitalizedLeg(s), unspecifiedMetal plates, metal panels
A crane operator was repositioning a material handler crane down a 6.5-degree slope. The crane started moving forward and struck the tail of a stopped truck. The cab of the crane crushed inward toward the operator, pinning him inside the cab. The crane operator's left femur was broken.
An employee was exiting the cab of his truck when he lost his footing and fell to the ground. The employee sustained two fractures to the right foot/ankle.
An employee was cutting a thick metal plate using a handheld torch when they began experiencing symptoms of heat exhaustion. The employee was hospitalized.
An employee was working in a barge, setting up plates. As the plates were being adjusted, they hit the employee in the wrist and back, breaking the wrist and bruising the employee's ribs. The employee was hospitalized for surgery.
On March 25, 2022, an employee had just detached a string of empty rail cars away from some loaded cars. The string of detached cars was being taken ahead, and the employee began pulling the knuckle of a rail car into the open position. The string of detached cars then momentarily came back, and the employee was pinched between two cars. The employee suffered a broken right hip and was hospitalized.
An employee was transporting an 800-pound die on a cart from the tool room. The employee was pulling the cart when it struck a metal plate on the floor. This caused the cart to tip forward and the die to slide off the cart. The die struck the employee's left foot and their second toe was amputated.
An employee was using a forklift to load pallets of product on a trailer. He exited the forklift to adjust a pallet by hand. The pallet fell on him, resulting in an injury to the left leg.
An employee was lifting a 500-pound steel counterweight off a pallet using a magnetic hold jib crane. The counterweight detached from the crane and the employee sustained a left foot/toe fracture that required surgery.
An employee was using a pipe wrench to turn a 42-foot-long steel pipe on jack stands to weld the bottom portion. The pipe fell off the stands, striking the injured employee on his left shin. The employee sustained a left leg fracture at the shin area as well as a tibia fracture that required surgery.
More severe injuries in this industry (NAICS 331111)
An employee used a crane to set down a bar. The bar measured 9 inches by 16 feet. The strap got stuck under the bar, and the employee asked another employee to jog the roll. The bar rolled and pinched the injured employee's left hand, resulting in a fingertip amputation.
An employee was loading a steel forming machine with steel to be processed. He went to move a cooling hose out of the way and his left thumb was crushed by the forming roller, resulting in injuries that required surgical amputation.
An employee was advancing a rail to line up for welding with a secondary rail on the weld line when his right middle and ring fingers were caught between the rails. The employee sustained an amputation to the top knuckle of the middle finger and a fracture to the ring finger. The machine was guarded at the time.
An employee was preparing bundles of 24-foot square metal tubing to be loaded onto a truck and cut the safety band for a bundle. While the employee was removing a piece of dunnage from a bundle, they bumped the bundle with their leg. The metal tubing then fell forward and struck the employee, causing a fractured left ankle.
An employee was traveling down the maintenance aisle of a warehouse on a single-pallet front rider jack. The jack malfunctioned, causing the brakes to apply; the employee fell forward onto the concrete warehouse floor. The employee suffered an injury to the left leg and was hospitalized, requiring surgery.
An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.
An employee was directing a truck driver to a dump site when the truck's peanut trailer slipped off the kingpin. As the trailer fell, a ladder attached to it lacerated the employee's ear. The employee was hospitalized.
An employee was unloading a forklift from a trailer to the ground. The employee was climbing down the ladder of the trailer when their foot slipped through one of the rungs, causing them to fall backward onto the forklift forks. The employee was hospitalized for fractured ribs.