Fall through surface or existing opening 16 to 20 feet · Fractures and other injuries, unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at Keystone Automotive Operations, Inc., 9 Campbell Rd, MOUNT BETHEL, PENNSYLVANIA 18343
on — Fractures and other injuries, unspecified, affecting the multiple body parts, n.e.c..
Final narrative
An employee was running wire through a crawl space when he fell through the drywall ceiling and landed 18 feet below on a concrete surface, suffering blunt force trauma to the head, a severe laceration to the leg, and a fractured lower back.
HospitalizedMultiple body parts, n.e.c.Ceilings
More severe injuries at Keystone Automotive Operations, Inc.
On July 31, 2023, an employee was getting up from his desk, when he tripped over a garbage can and fell to the floor. The employee sustained an injury to his shoulder that required surgery and was hospitalized.
An employee was in a loading dock, staging and sorting auto parts. He slipped or tripped on tailgate liners that had fallen to the concrete floor, striking his head against the floor.
An employee was processing returns and moving 3-pound plastic totes by hand. He picked up an empty tote to stack it and hurt his lower back, requiring hospitalization for severe back pain.
On November 16, 2023, at around 3:30 p.m., a subcontracted employee was painting a door jam on a three-story house when he fell 20 feet through an opened elevator shaft to the floor below. The employee sustained fractured vertebrae that required hospitalization.
Employees were removing and replacing skylights on a metal roof. The injured employee's lanyard became tangled and they fell through the skylight to the ground 16-18 feet below. The employee suffered fractures to the wrist, ribs, and hip.
An employee was requested by a client to string wire on top of an auditorium. He used a boom lift to access a beam and then exited the boom lift to walk on the beam. He then stepped down on a drop ceiling, lost balance, and fell. The drop ceiling caved in and the employee fell 20 feet onto bleachers sustaining injury to his abdominal area and lower left leg. The employee was wearing a harness, but it was not connected to an anchoring point at the time of the fall.
An employee was installing decking (steel grates) in a new construction steel framed building. The employees were working approximately 22' above the next lower level, which was a concrete ground floor. The decking was pre-cut with the floor opening prior to installation. Shortly after installing the floor opening, the employee fell through the floor opening, approximately 18' onto a section of metal ductwork, resulting in fractures to the skull, ribs, thorax, and lumbar vertebra, as well as an ear laceration.
An employee was taking measurements of an area for drywall when they stepped backward into a partially covered hole in the floor. The employee fell approximately 17 feet to the level below, sustaining a forehead fracture and avulsion, a right shoulder dislocation, a left forearm fracture, left knee tendon and meniscus tears, as well as multiple contusions and abrasions.
More severe injuries in this industry (NAICS 238350)
An employee was standing on trusses while installing shaftwall and metal channel. He slipped from the bottom chords of the 2x6 trusses and fell approximately 1 foot. A metal C-channel caused a severe laceration to his wrist and ulnar artery.
An employee was working on a scaffold installing windows when they fell 6 feet to the ground and impacted their head. The employee sustained head trauma.
An employee was standing on a scaffold approximately 7 feet high and passing plywood sheets to another employee on a single-story roof. The employee fell backward off the scaffold to the ground below and the sheet of plywood fell on him, resulting in fractures to the left side of his jaw and three ribs.
On July 25, 2025, an employee was walking on roof trusses when they fell 10 feet to the ground. The employee was hospitalized with a concussion and a back injury.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.