Struck by object falling from vehicle or machinery-other than vehicle part · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Berry Global, Inc., 1500 Milton Avenue, SOLVAY, NEW YORK 13209
on — Amputations, affecting the fingertip(s).
Final narrative
An employee was in the process of performing a plate change on a printing press when a locking strut failed, causing a color head to drop. The color head struck the employee's right-hand third digit, causing a distal phalanx fracture and fingertip amputation.
AmputationFingertip(s)Machine and appliance parts, n.e.c.
On September 20, 2022, an employee was installing wear pads under the newly installed mold carrier in a plastic injection press carrier. The employee used a crane with a nylon sling to slightly tilt the carrier so the wear pads could be placed. The sling failed, snapped, and struck the employee's left index finger, causing an amputation to the finger.
An employee went to pick up a tool that had fallen near an adjacent machine. Their left hand became caught inside a blower motor fan blade, resulting in a dislocated finger and a fractured finger. Surgery was required to repair the injuries.
An employee was trying to pull trim on rollers. His left wrist and fingers were pinched by the edge rollers, causing fractures to the wrist, the little finger, and the ring finger.
On October 5, 2020, at approximately 8:13 a.m., an employee was preparing to string a cast extrusion line. When the employee ducked under the winder to grab the rope used to string, the carriage moved forward and struck the employee in the face. The employee fell to the floor and struck their head on the floor resulting in a severe head injury.
An employee was transporting an 800-pound die on a cart from the tool room. The employee was pulling the cart when it struck a metal plate on the floor. This caused the cart to tip forward and the die to slide off the cart. The die struck the employee's left foot and their second toe was amputated.
An employee was using a forklift to load pallets of product on a trailer. He exited the forklift to adjust a pallet by hand. The pallet fell on him, resulting in an injury to the left leg.
An employee was lifting a 500-pound steel counterweight off a pallet using a magnetic hold jib crane. The counterweight detached from the crane and the employee sustained a left foot/toe fracture that required surgery.
An employee was using a pipe wrench to turn a 42-foot-long steel pipe on jack stands to weld the bottom portion. The pipe fell off the stands, striking the injured employee on his left shin. The employee sustained a left leg fracture at the shin area as well as a tibia fracture that required surgery.
More severe injuries in this industry (NAICS 326199)
An employee was operating a drill and tap machine. He was placing a part with his right hand and removing a part coming in on the left side. He saw a part that was crooked and went to straighten it. The machine clamped down on his left index finger, degloving the top part of the finger and resulting in a partial amputation.
An employee was performing maintenance on a roll cutting machine in a warehouse. The employee was removing excess grease from the bearings when the machine's chain caught their right index finger. The fingertip was amputated by the chain and sprocket.
During fiberglass work, an employee mixed a methyl ethyl ketone peroxide (MEKP) catalyst with a cobalt chemical that they thought was a dye. A chemical reaction occurred, resulting in an explosion. The employee sustained second-degree burns on his back and a blister on his right arm.
An employee was walking when she tripped over a box on the ground and fell. The employee was hospitalized with a severe dislocation to the hip and leg that required surgery.
An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.
An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.
An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.