Caught in or compressed by equipment or objects, unspecified · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Berry Global, Inc., 6940 W. 76th Street South, TULSA, OKLAHOMA 74131
on — Fractures, affecting the hand(s) and wrist(s).
Final narrative
An employee was trying to pull trim on rollers. His left wrist and fingers were pinched by the edge rollers, causing fractures to the wrist, the little finger, and the ring finger.
HospitalizedHand(s) and wrist(s)Machinery, unspecified
On September 20, 2022, an employee was installing wear pads under the newly installed mold carrier in a plastic injection press carrier. The employee used a crane with a nylon sling to slightly tilt the carrier so the wear pads could be placed. The sling failed, snapped, and struck the employee's left index finger, causing an amputation to the finger.
An employee went to pick up a tool that had fallen near an adjacent machine. Their left hand became caught inside a blower motor fan blade, resulting in a dislocated finger and a fractured finger. Surgery was required to repair the injuries.
On October 5, 2020, at approximately 8:13 a.m., an employee was preparing to string a cast extrusion line. When the employee ducked under the winder to grab the rope used to string, the carriage moved forward and struck the employee in the face. The employee fell to the floor and struck their head on the floor resulting in a severe head injury.
At 4:10 a.m. on April 10, 2020, an employee was setting up a new roll of plastic on a winder machine. The machine pulled in the employee's left hand, breaking several bones in the forearm area. The employee was hospitalized.
An employee was changing mud cups in the hopper cylinders of a concrete pump truck. The cylinders moved and three of the employees fingers were amputated.
An employee was standing on the rig floor next to a polishing unit. His hand was placed on the polishing unit when the pump was lowered, resulting in amputation of their right thumb, ring, and middle fingertips.
An employee was using air to blow out the air wash to the blender and grinder station. As the employee reached to verify that the air wash was clean, the unit pinched and amputated their fingertip.
An employee was retrieving a lost drill pipe with a lifting bail when their left thumb got pinched between the table and handle of the lifting bail while trying to re-thread the pipe to lift it out. The employee suffered an amputation to the left thumb.
An employee was removing a core chuck from a stationary roll when their right ring finger was pinched between the chuck and the roll. The employee's fingertip was amputated.
More severe injuries in this industry (NAICS 326199)
An employee was operating a drill and tap machine. He was placing a part with his right hand and removing a part coming in on the left side. He saw a part that was crooked and went to straighten it. The machine clamped down on his left index finger, degloving the top part of the finger and resulting in a partial amputation.
An employee was performing maintenance on a roll cutting machine in a warehouse. The employee was removing excess grease from the bearings when the machine's chain caught their right index finger. The fingertip was amputated by the chain and sprocket.
During fiberglass work, an employee mixed a methyl ethyl ketone peroxide (MEKP) catalyst with a cobalt chemical that they thought was a dye. A chemical reaction occurred, resulting in an explosion. The employee sustained second-degree burns on his back and a blister on his right arm.
An employee was walking when she tripped over a box on the ground and fell. The employee was hospitalized with a severe dislocation to the hip and leg that required surgery.
An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.
An employee was working in the food service warehouse when he experienced chest pain, difficulty breathing, and lost consciousness. The employee sustained carbon monoxide poisoning.
An employee was cutting a piece of metal rod with a metal cutting machine. His right middle finger became caught between the rod and the machine's table. The employee's fingertip was partially amputated.
An employee was working at her desk. She went to stand up and fell to the floor beside the desk. The employee sustained a hip displacement and required surgery.
An employee was processing wood boards at a chop saw when the saw malfunctioned and the blade cut her left hand and fingers. She was hospitalized and her little finger was surgically amputated.