LITTLETON, COLORADO—
Accu-Precision Tool & Gauge Company, LLC
Caught in running equipment or machinery, n.e.c. · Cuts, lacerations
At a glance
Federal OSHA recorded a severe workplace injury at Accu-Precision Tool & Gauge Company, LLC, 2120 W. Chenango Ave., LITTLETON, COLORADO 80120 on — Cuts, lacerations, affecting the finger(s), fingernail(s), unspecified.
Final narrative
An employee was attempting to remove a tool from a milling machine when the tool arm closed on the tool and pinched his left thumb, lacerating it. He was hospitalized and had surgery.
Similar incidents · Same event type
MIDLAND, TEXAS—
Scout Surface Solutions
Employees were assembling and testing a butterfly valve unit and actuator combo. When the unit was function tested with air, the valve gate closed on an employee's left thumb resulting in a fracture and laceration.
CHESTER, ILLINOIS—
Gilster-Mary Lee Corporation
An employee was doing a daily inspection of the sifter screen on a mixer when the mixer line activated. The armature for the screen struck the employee's right wrist. Their wrist was cut and their hand was fractured.
DALLAS, TEXAS—
Maxwell Paper Products Co
An employee was being trained on a machine when a roller came down on their hand, resulting in a fracture and laceration.
CONESTOGA, PENNSYLVANIA—
Turkey Hill LLC
An employee was doing a dry run during the setup of an ice cream machine. The machine indexed and the filler head amputated the employee's left middle finger above the last knuckle.
ERIE, PENNSYLVANIA—
Erie Strayer Company
An employee was on a 3-foot ladder guiding cable onto a spool during installation on an overhead door. As the control box was jogged, the employee's hand was caught between the cable and spool, resulting in a wrist and hand fracture.
More severe injuries in this industry (NAICS 332710)
DEER PARK, TEXAS—
UPS Industrial Services, LLC
An employee was positioning dunnage on a trailer while pipe was unloaded from a forklift. A pipe fell and the employee's right thumb and index finger were caught between the pipe and a piece of dunnage. The thumb was crushed, and the index fingertip was amputated.
BETHLEHEM, PENNSYLVANIA—
Phoenix Tube Company, Inc.
An employee was using a lifting sling on a crane to move a straight-bar bundle and place it on top of an existing bundle. When moving the lifting sling, it became pinched between the bundle and a wood cleat. The bundle then fell onto the employee's left foot, resulting in crush injuries.
FORT SMITH, ARKANSAS—
Kopco, Inc
An employee was stacking metal tubes using a forklift. A stack became unstable and the employee got out of the forklift to steady it, instructing his helper to get into the forklift. The forklift movement caused some tubes to fall and strike the employee, resulting in an open fracture of his left hand.
CORDOVA, ALABAMA—
Wilson Machine & Welding, Inc.
An employee was setting up a flexible gear coupling hub in a lathe, preparing to bore it out to fit a shaft. The hub assembly was not secured in the chuck when the crane support was removed, and the employee's right little finger was caught between the hub assembly and the inside of the lathe. The fingertip was amputated.
CLEWISTON, FLORIDA—
D & J MACHINERY, INC.
An employee was using a crowbar to loosen a flat bar when the crowbar struck the employee's right eye. The employee was hospitalized and required surgery.
More severe injuries in COLORADO
GREELEY, COLORADO—
ABC Supply Company
An employee was delivering materials. He was doing his pre-delivery inspection on the roof of the jobsite (a warehouse) when he fell through a plexiglass skylight. He landed on his feet on the concrete floor 14 feet below. The employee sustained fractures to his spine, left ulnar/radius, and right heel. The employee required surgery.
BOULDER, COLORADO—
Burke Builders Inc
An employee was cutting cabinet trim using a table saw when four fingers on his left hand were severed, resulting in hospitalization and amputation.
LONGMONT, COLORADO—
Circle Graphics, Inc.
An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.
DENVER, COLORADO—
FLATIRON CONSTRUCTION CORP.
A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.
BURLINGTON, COLORADO—
Takkion OPS Management
An employee was standing on an extension ladder, using a torquing tool to remove bolts that secured blades to a rotor. When the torquing tool activated, its reaction arm came around and pinched the employee's right middle finger against a lifting eye. His fingertip was amputated.