WICHITA, KANSAS—
Tramco Inc
Caught in running equipment or machinery during regular operation · Amputations
At a glance
Federal OSHA recorded a severe workplace injury at Tramco Inc, 1020 E 19th St N, WICHITA, KANSAS 67214 on — Amputations, affecting the fingertip(s).
Final narrative
An employee was placing a piece of metal in the press brake and caught his left ring and middle fingers in the press. Both fingertips were surgically amputated.
More severe injuries at Tramco Inc
WICHITA, KANSAS—
Tramco Inc
An employee was unloading the paint line. Metal panel 1 was on a cart. Metal panel 2 was being lowered to release the hooks between the panels. The hooks twisted, became locked, and did not release, pushing panel 2 up and off the paint line hook. Panel 2 fell approximately 5 inches, amputating the employee's right-hand pinky fingertip.
WICHITA, KANSAS—
Tramco Inc
An employee was operating a grinder and lacerated the left inner thigh requiring hospitalization. The grinder was not guarded at the time of the incident.
WICHITA, KANSAS—
Tramco Inc
An employee was securing a lift hook to a table on a jib crane when the employee's right thumb tip was crushed/amputated between the hook and lift table.
View Tramco Inc's full OSHA safety record →
Similar incidents · Same event type
DELAND, FLORIDA—
Pall Corporation
An employee was operating a machine when a wire pulled his right glove resulting in amputation of the index and middle fingertips.
FAIRFIELD, OHIO—
Koch Foods of Cincinnati
An employee was grinding chicken when their right index fingertip was caught in the grinder and amputated.
BAY MINETTE, ALABAMA—
Stella-Jones Corporation
An employee was sharpening peeler blades when their shirt was caught in the grinding wheel. The employee sustained tendon damage and a crushed right hand.
THEODORE, ALABAMA—
Mack Manufacturing, Inc.
An employee was passing through a large metal door when the door closed on the employee, resulting in a cracked rib.
THOMPSON, CONNECTICUT—
Nutmeg Container Corporation
An employee was preparing to cut lumber on a panel saw when the clamp engaged and caught the employee's left middle finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 333922)
PANHANDLE, TEXAS—
3S Americas, Inc.
An installation technician for a wind turbine lift was using a chain hoist to move materials up a tower. The chain storage unit overflowed; the chain spilled and fell about 40-50 feet down the tower. It struck the injured employee in the face, causing fractures to their nose and cheekbones.
JONESBORO, ARKANSAS—
Hytrol Conveyor Company, Inc.
On November 25, 2024, at 9:00 a.m., two employees were moving a metal staging pallet that was located in an automation cell. The injured employee slipped and their left middle finger was crushed between the pallet and metal frame of the machine, resulting in an amputation to the finger padding.
JONESBORO, ARKANSAS—
Hytrol Conveyor Company, Inc.
On October 22, 2024, at approximately 10:15 a.m., an employee was forming a stand leg on a standard brake press. As they were readjusting the part, the tip of their right thumb was caught in the brake press, resulting in a partial amputation. The incident occurred during training.
JOHNSTON, RHODE ISLAND—
Dematic Corp
An employee was working on a ladder when he lost his balance and fell onto the conveyor rail, resulting in two broken ribs and hospitalization.
BURLESON, TEXAS—
KWS Manufacturing Company, Ltd.
An employee was cleaning welding debris from a steel part that was in a fixture. The part moved, cut through the employee's cut-resistant glove, and amputated their right middle fingertip.
More severe injuries in KANSAS
WATHENA, KANSAS—
Omya Inc.
An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.
COFFEYVILLE, KANSAS—
John Deere Coffeyville Works
An employee was moving a rack onto a lower conveyor in the south heat treat area when their finger got caught between the part tray and the rollers, resulting in a fingertip fracture and amputation.
HAVEN, KANSAS—
Haven Steel Products Inc
An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.
MINNEOLA, KANSAS—
Vestas-American Wind Tech
Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.
MEADE, KANSAS—
Alliance Ag and Grain LLC
An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.