Caught in or compressed by equipment or objects, unspecified · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Electric Boat, 75 Eastern Point Road, GROTON, CONNECTICUT 06340
on — Amputations, affecting the finger(s), fingernail(s), unspecified.
Final narrative
An employee was adjusting a vice on a drill press table when the device shifted, causing his left pinky finger to become caught between the key slot and the fixture. A chunk of flesh was removed.
A 6-foot piece of steel weighing approximately 1,300 pounds was being hoisted, when it slipped from the rigging and fell from approximately 8 feet, striking a machine and then striking an employee in the leg. The employee's leg was fractured.
A painter working in the sonar dome of a submarine was power washing in a confined space when they fell three levels (approximately 20 feet) through a 2' x 4' access hole. The employee lost consciousness and suffered a contusion to the back of the head and pneumonia from inhaled water.
After performing a welding operation inside of a tank, an employee was exiting the tank when his leg caused a welding lead to short against the side of the tank and an electric arc occurred. His leg was burned, requiring hospitalization.
An employee had put a pipe in a vise and was adjusting the flange to insert a ring into the unit. The unit slipped from the vise; as the pipe fell and the employee tried to grab it, the vise pinched the employee's finger. He suffered a fingertip amputation on his left hand.
An employee was changing mud cups in the hopper cylinders of a concrete pump truck. The cylinders moved and three of the employees fingers were amputated.
An employee was standing on the rig floor next to a polishing unit. His hand was placed on the polishing unit when the pump was lowered, resulting in amputation of their right thumb, ring, and middle fingertips.
An employee was using air to blow out the air wash to the blender and grinder station. As the employee reached to verify that the air wash was clean, the unit pinched and amputated their fingertip.
An employee was retrieving a lost drill pipe with a lifting bail when their left thumb got pinched between the table and handle of the lifting bail while trying to re-thread the pipe to lift it out. The employee suffered an amputation to the left thumb.
An employee was removing a core chuck from a stationary roll when their right ring finger was pinched between the chuck and the roll. The employee's fingertip was amputated.
More severe injuries in this industry (NAICS 336611)
An employee was hooking up bundled tie-downs with a chain. While he was holding a hook, the other hook was unlocked. This caused the employee's hook to slide down and pinch his right index finger between the chain and the shackle. He suffered an amputation to the fingertip (without bone loss), as well as an open fracture.
An employee was preparing to bend a flat bar in a brake press. When the machine was jogged, the stock rotated up and crushed his left middle fingertip against the outer frame of the die. The fingertip was amputated.
An employee was cutting metal with a torch. A piece of metal struck the employee's left foot, causing multiple fractures to metatarsal(s). The employee was hospitalized.
An employee was descending a ladder carrying a bag of trash. He fell, landed on the ground about 10 feet below, and suffered fractures to his right hip and pelvis.
An employee was checking on a machine outside of the building and removed a cover to clean out a blocked area. His hand was caught by a rotary valve in a dust collection machine. The employee's fingertip was amputated.
An employee was working to clean a glue roller with a scraper tool. The tool and the employee's left thumb were pinched between two rollers, resulting in a partial amputation.
An employee was re-arranging boxes of pipe insulation on a pallet. One of the boxes fell from the pallet and knocked over an upright empty cylinder. The cylinder fell and crushed the tip of the employee's right toe. The employee's toe required surgical amputation.
An employee was securing the claw of a grapple truck to the truck bed. His left little finger was caught between the tie down strap and the rub rail of the truck, resulting in partial amputation of the finger.
An employee was cutting extruded aluminum framing material using a horizontal band saw. She went to grab a rag in the machine when the rag contacted the blade and pulled her hand in toward the blade, resulting in a partial amputation of the right index finger.