Team Industrial Services

An employee was operating a vertical turret lathe that was rotating at approximately 22 RPM. While standing on an elevated work platform, the employee leaned over toward the lathe when his arm was struck by a rotating magnet that was attached to the lathe. This impact caused the employee to fall forward and become caught between the vertical turret lathe table chuck and the back of the turret wall. The employee suffered a lacerated spleen, fractured scapula, bruised brachial plexus, fractured ribs, and head lacerations. The lathe was equipped with a chip guard at the time of the incident.

An employee was setting up a flange machine during training. The machine shifted, pinching his right hand against the flange. The hand was broken and lacerated, and he was hospitalized.

An employee fell from an exchanger rig as he descended. The employee fell onto a basket made of angle iron and fractured ribs and bruised a lung.

An employee slipped on ice in the parking lot and fractured his left leg, requiring hospitalization.

An employee was cleaning leaking plastic from an injection nozzle. As the employee was lifting and dislodging plastic, the nozzle shifted and burst apart. The nozzle struck the employee's mouth and jaw and burned the employee. They also sustained a jaw fracture.

An employee turned on a pump to unload a truck. There was an explosion that caused burns to the employee's hand and face.

An employee was fueling a tractor with diesel when there was an explosion and a fire started. The employee sustained third-degree burns to 32% of his body, chest, and arms.

An employee was torching materials to free a jam in a baler machine when an explosion occurred, resulting in second-degree burns to their left arm and leg that required hospitalization.

An employee was welding an oil pipe and installing a gauge on the pipe of a drilling rig. As he cut into it with a torch, an explosion occurred. The shockwave of the explosion caused the employee to sustain a concussion and multiple broken bones.

An employee was operating a horizontal belt sanding machine that rotates a metal sanding belt. The employee switched hands while the belt transitioned from left to right. When the machine's speed was adjusted, the employee s left hand was pulled into the machine and crushed. The employee was hospitalized and required surgery.

An X-ray machine had lost power and an employee went to replace the power supply. While replacing a cable on the power supply assembly, the employee's right hand contacted the grounding terminals coming out of the back of the power supply assembly and they received an electric shock. The employee was hospitalized.

On March 19, 2025, an employee was retrieving a medical specimen from the back of a vehicle. When he turned to enter the building, he either tripped over something or lost his footing and fell due to an incline in the pavement. The employee was hospitalized with a head abrasion and injuries to his right shoulder and right hip.

Employees were pulling a chemical sample from a device (sample port). The sample wouldn't come out because there were two samples in the port. The employees then turned off and deenergized the machine to 0 pounds per square inch. They unscrewed the top of the machine to retrieve the stuck samples when a small amount of pressure caused liquid to squirt out and onto one of the employee's face shields as the lid was removed. The employee was hospitalized due to chemical exposure.

An employee was walking around a boiler recovery tank when they stepped into an uncovered U-drain filled with hot water. The employee sustained second-degree burns to their right leg and the top of their foot.

An employee fell while moving a water canister, resulting in fractures to four fingers on her right hand.

An employee was changing a die in a press when the die slipped and crushed the employee's left index finger. The employee sustained an open facture of the tuft of the left distal phalanx and a partial amputation.

An employee was mixing sauce using a sauce barrel mixer when his left little finger was amputated.

An employee was driving a boom lift (in the lowered position) in an exterior dock area. The lift s left wheels rolled onto base plates that covered a 3-foot-deep sump pit. The base plates failed, and one side of the lift dropped. The employee's left leg was caught under the lift basket, and he suffered a fracture to the lower leg including the ankle.

A temporary employee was carrying a nail gun through the warehouse when it hit his leg, activated, and fired a nail into the leg.