Weyerhaeuser

During a maintenance day, two operators locked out the lathe to replace the trash gate cylinder. To complete the lockout, the lathe operator raised the trash gate to the pin position while another operator inserted a pin for the gate to rest on while the work is performed. When this event occurred, the lathe operator was in the cab, and the other operator was at the trash gate with the blocking pin. While inserting the pin, the gate rose from the run position to the pin position, pinching the injured employee's left middle finger and resulting in a fingertip amputation.

An employee was emptying a self-emptying trash dumpster. When the lever came down onto the track that guides the hopper into the dumping position, the employee sustained partial amputations to the right middle and index fingers.

An employee was climbing onto the outfeed roll case of a band mill. His left hand was on a 4-inch square tubing support beam as he stepped onto a bottom rail of the handrail. The handrail was attached to a set of steps, which tilted up. His left ring finger was smashed between the handrail and the square tubing. His fingertip was amputated.

An employee was operating a three-wheeled personal electric transport vehicle. While traveling up a concrete grade of approximately 30 degrees, the equipment failed. The employee then attempted to turn left, back down the incline, and the front wheel may have caught on a concrete barrier. The employee fell out of the vehicle, landed on the concrete ground and sustained a broken left femur.

As an employee was walking to his work station, he saw two boards misaligned on the green trimmer conveyor belt. When he reached to align the boards his left pinky finger was jammed between the conveyor belt wall and the boards. His left pinky fingertip was surgically amputated.

Employees were assembling and testing a butterfly valve unit and actuator combo. When the unit was function tested with air, the valve gate closed on an employee's left thumb resulting in a fracture and laceration.

An employee was doing a daily inspection of the sifter screen on a mixer when the mixer line activated. The armature for the screen struck the employee's right wrist. Their wrist was cut and their hand was fractured.

An employee was being trained on a machine when a roller came down on their hand, resulting in a fracture and laceration.

An employee was doing a dry run during the setup of an ice cream machine. The machine indexed and the filler head amputated the employee's left middle finger above the last knuckle.

An employee was on a 3-foot ladder guiding cable onto a spool during installation on an overhead door. As the control box was jogged, the employee's hand was caught between the cable and spool, resulting in a wrist and hand fracture.

An employee was working with a group of tree trimmers to trim a tree that was approximately 66 feet high and 28 inches in diameter. When the tree fell, it struck the employee. He was hospitalized with multiple fractures to the left side of his body, including his head.

On July 18, 2025, at approximately 1:09 PM, an employee was moving a trailer-mounted de-limber. He set his ground saw on the de-limber trailer and then got off the loader and stood to the side of the ground saw. A grapple skidder was raising the trailer slightly so he could throw the chain under the trailer to secure the ground saw. He then turned around and the ground saw slid off the trailer and struck his back. The employee was hospitalized with four fractured vertebrae.

On June 23, 2025, an employee was assisting with a tire replacement. As the employee was returning with tools, two co-workers were positioning the tire on the hub. The tire released pressure, causing a piece of the split rim to strike the employee. They were hospitalized with a fractured left ankle and pelvis.

An employee was cutting a tree. As they were walking away, part of the tree broke off and struck the employee. The employee sustained five broken ribs and a punctured lung.

An employee was climbing down a tree after setting a rope to allow the tree to be removed. A knot at the end of his climbing system failed and he fell from the tree, landing about 35 feet below. He suffered fractures to the pelvis and spinal cord and was hospitalized.

A driver was exiting his vehicle outside the plant gate when his foot slipped on the top step of the truck. He fell to the ground, landed on his left hip and elbow. The employee was hospitalized with a fractured hip/femur.

A security employee was responding to an urgent call from staff regarding a violent patient. The employee tripped and fell on the floor outside of the stairwell. The employee sustained a closed head injury, contusion of the cerebrum without loss of consciousness, and a closed fracture of the distal end of the right radius.

A security employee was holstering her firearm when the gun discharged a bullet into her right leg. The employee was hospitalized.

A temporary employee was testing an electrical starter motor. He was placing tape on the starter while the breaker was not engaged, but the starter sent an arc flash that burned his hands and stomach.

An employee was walking on a sidewalk and stubbed his toe on an elevated portion of concrete, causing him to trip and fall. The employee's right knee was dislocated.