Caught in running equipment or machinery during maintenance, cleaning · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Adlam Films, 62 County Road 520, SHANNON, MISSISSIPPI 38868
on — Amputations, affecting the fingertip(s).
Final narrative
An employee was cleaning a press roller with ink buildup when his right thumb was caught between two rollers, resulting in a partial amputation of the thumb tip. The pinch point was not locked out at the time of the incident.
HospitalizedAmputationFingertip(s)Special process machinery, unspecified
An employee was threading film through a machine. The film got caught on the casting drum, pulling the film and employee's arm between a roller and the casting drum. The employee sustained a friction burn.
Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.
An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.
An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 333244)
An employee was moving a cylinder onto a hand truck when it fell, making contact with her lower left leg and crushing her left little finger against the floor. She suffered a partial amputation to the finger and a fracture to the lower leg.
An employee was operating a press machine when the press fractured and lacerated four fingers, requiring hospitalization and surgery. The machine was not guarded at the time.
An employee was assembling equipment. He was making a controlled adjustment to a pneumatic cylinder by slowly adding air pressure. As the pressure built, one of the safety latches dis-engaged, causing the cylinder to move suddenly and crush the employee's left middle finger against a mounting bracket. The employee's fingertip was partially amputated.
An employee was cleaning rotating parts on a print press using a rag. The rag was caught in a pinch point and her hand was pulled into the machine, resulting in a right middle fingertip amputation.
An employee was retrieving a tool from an envelope inserting machine. A belt pulled the employee's hand into the machine's gears, causing multiple finger amputations.
An employee was checking a pole-type transformer tank for leaks. A hydraulic clamping device was lowered onto his right thumb and crushed it against the sharp edge of the bottom of the tank. He suffered a partial transphalangeal amputation to the thumb.
The injured employee was standing behind a table. She jumped out to scare another employee, but tripped and fell on the tile floor, injuring her right ankle/foot. She was hospitalized with a dislocated ankle that required surgery.
An employee was going into a trailer to mark product for shipment and the trailer pulled away from the dock. The employee fell out of the trailer, contacted the dock plate, and then fell to the ground. The employee was hospitalized with a punctured lung, fractured ribs, and contusions.
An employee was hooking up bundled tie-downs with a chain. While he was holding a hook, the other hook was unlocked. This caused the employee's hook to slide down and pinch his right index finger between the chain and the shackle. He suffered an amputation to the fingertip (without bone loss), as well as an open fracture.
An employee was operating a gas tugger to lift metal sheeting. His left hand was pulled into the pulley, which crushed his left thumb, resulting in avulsions and other tissue damage. He was hospitalized and required surgery.