SEWARD, NEBRASKA—
Tenneco Inc.
Struck by object falling from vehicle or machinery-other than vehicle part · Cuts and abrasions or bruises
At a glance
Federal OSHA recorded a severe workplace injury at Tenneco Inc., 111 Izzak Rd , SEWARD, NEBRASKA 68434 on — Cuts and abrasions or bruises, affecting the head, unspecified.
Final narrative
An employee was operating a hoist when the hoist retention hook failed causing the hoist to fall and strike the employee on the head. The employee sustained a head contusion and laceration.
More severe injuries at Tenneco Inc.
PARAGOULD, ARKANSAS—
Tenneco, Inc.
An employee was walking to the breakroom, tripped over a container tote, and fell to the concrete floor. The employee sustained a left ankle fracture.
BOAZ, ALABAMA—
Tenneco, Inc.
A maintenance employee was conducting repairs on the conveyor belt of an automatic palletizer. The employee's shirt fell in front of a sensor causing the equipment to energize. The employee's right middle finger was caught by chains within the conveyor belt motor resulting in a partial amputation.
SEWARD, NEBRASKA—
Tenneco Inc.
An employee was performing an air check on an articulated dump truck when their finger was pinched in the clamping mechanism on the lift assist. The employee's right middle finger was amputated above the distal interphalangeal joint.
WAUPUN, WISCONSIN—
Tenneco Inc.
An employee was responding to a work order relating to a machine that was not cooling when the lid of the machine lowered onto the employee's thumb. They sustained a left thumb fracture and partial amputation that required hospitalization.
VAN WERT, OHIO—
Tenneco Inc.
An employee had just replaced a broken sprocket and put in a new chain on a high-volume oil conveyor. The chain seized up. As he tried to free it, it took off and his left index finger was caught between the chain and the sprocket. The fingertip was amputated halfway up the nail.
View Tenneco Inc.'s full OSHA safety record →
Similar incidents · Same event type
HOUSTON, TEXAS—
Star Pipe Products LTD
An employee was using a crane. The hook slipped and a fitting fell onto a finger on the employee's left hand causing a fracture and laceration.
HOLLY SPRINGS, MISSISSIPPI—
KP Building Products, Inc.
An employee was transporting an 800-pound die on a cart from the tool room. The employee was pulling the cart when it struck a metal plate on the floor. This caused the cart to tip forward and the die to slide off the cart. The die struck the employee's left foot and their second toe was amputated.
BURLINGTON, NEW JERSEY—
BJ'S WHOLESALE CLUB, INC.
An employee was using a forklift to load pallets of product on a trailer. He exited the forklift to adjust a pallet by hand. The pallet fell on him, resulting in an injury to the left leg.
YOUNGSTOWN, OHIO—
International Steel and Counterweights LLC
An employee was lifting a 500-pound steel counterweight off a pallet using a magnetic hold jib crane. The counterweight detached from the crane and the employee sustained a left foot/toe fracture that required surgery.
KILLEEN, TEXAS—
Seneca Mechanical, LLC
An employee was using a pipe wrench to turn a 42-foot-long steel pipe on jack stands to weld the bottom portion. The pipe fell off the stands, striking the injured employee on his left shin. The employee sustained a left leg fracture at the shin area as well as a tibia fracture that required surgery.
More severe injuries in this industry (NAICS 336390)
PHENIX CITY, ALABAMA—
ILJIN USA Corporation
An employee was changing out the sensor wire on a sensor cap press. The machine actuated after the sensor was replaced, resulting in the amputation of the employee's left little finger.
EL PASO, TEXAS—
Global Enterprises
A temporary employee was working on a plastic extrusion machine. The employee's left index finger got caught between the rotary gears, resulting an amputation to the finger.
HOUSTON, TEXAS—
Envirotech Vehicles, LLC
An employee in the warehouse area was operating a semi-automated machine and noticed that the machine was not operating properly. He went to use a paper towel to clean the main rollers and his left hand was caught by the rollers. Two fingers were crushed.
GRAND PRAIRIE, TEXAS—
Flex-N-Gate Texas, LLC
An employee was walking to collect trash from a box at a work cell parts stand. A leg of the stand caught the employee's foot, causing the employee to lose balance, fall to the floor, and suffer a broken left elbow.
MONTGOMERY, ALABAMA—
Mobis Alabama, LLC
An employee's leg became entangled in a printer power cord. As she stepped backward, she got hung up and fell. She landed on her right side and suffered a broken right hip.
More severe injuries in NEBRASKA
NEBRASKA CITY, NEBRASKA—
Concrete Industries Nebraska City
An employee was stacking concrete blocks for a concrete bunker. As a block was swinging into place, the employee's left leg was pinched between two blocks, resulting in injuries to his left heel and lower leg.
OMAHA, NEBRASKA—
Elkhorn Mechanical and Combustion
An employee was climbing a ladder to inspect a vent in a restaurant dining area. The ladder slid out on the floor and the employee fell approximately 12 feet onto the ladder and the floor. He was hospitalized with a dislocated shoulder and a back injury.
LINCOLN, NEBRASKA—
4 Seasons Property Services, Inc.
An employee was rappelling down a tree. When he was most of the way down, he fell on the ground and suffered a broken pelvis.
KEARNEY, NEBRASKA—
Cellar Crew LLC
An employee was filtering a fryer with a fryer filter machine. After going around the corner and then returning to the fryers, the employee stepped into the filter machine. The hot oil burned the employee's right ankle, and the employee was hospitalized.
ELGIN, NEBRASKA—
BANB Farms Inc.
An employee was cleaning out corn from a grain bin. The sweep auger in the bin was activated and caught his trouser leg. His leg was pulled into the auger, which injured his calf and caused leg fractures and lacerations.