Builders First Source

An employee was measuring a block on a pedal-operated upcut saw equipped with a 10 or 12 inch circular blade. As he was taking a measurement, the blade contacted his left hand, resulting in amputations of three fingers.

Employees were stacking two different types of trusses in a yard. One employee was lifting one end of a truss with a forklift while another inserted a spreader block. The load shifted, and the second employee's left ring finger was pinched between the block and the trusses. The finger was amputated.

An employee had been installing door and inside trim at a location. The employee was cutting lumber with a chop saw and amputated his left middle and index fingers.

An employee was behind a truck, preparing to dump one of two pallets of lumber from the truck's dump body (which had been raised so the lumber could be unloaded). The other pallet slid off the truck and struck the employee's lower leg, breaking it.

An employee was unloading lumber from a railcar. Railcars have ladders welded to each side for employees to enter/exit. The employee was climbing down one of the railcar ladders and slipped and fell between 6 and 8 feet to the ground. The employee suffered a fractured back, dislocated shoulder, and laceration to the top of the head.

An employee was stepping out of a car when they slipped and fell on ice, resulting in a femur fracture.

An employee was closing up for the weekend when they slipped on oil and brake fluid and fell. The employee suffered a leg fracture.

An employee was working in the forest flagging an area to be harvested. He took a step and his foot slipped on a stick hidden under the leaves, causing him to fall to the ground. He landed on his right foot/lower leg resulting in a fractured tibia.

An employee was inspecting an apartment to ensure it was ready for a new resident to move in. The carpet in the apartment had been recently cleaned and was still wet. As the employee went from the carpet to the tiled floor of the bathroom, they slipped and fell, resulting in a torn left hamstring.

An employee was delivering a letter along a rural carrier route when she stepped on an ice-covered snow drift, slipped, and fell to the ground. The employee sustained a right hip fracture that required surgery.

An employee was shoveling excess material (spillage) that consisted of dry mix, sand, aggregate and cement. As he was shoveling, some material blew back in his face and around his safety glasses. He got a piece of metal in his left eye that required surgery. The employee was hospitalized.

An employee was spotting the dust auger as it was lowered onto the trailer so that it would not contact a piece of equipment already on the trailer and pinch electrical cords. As the auger was being moved into place horizontally, his thumb was caught between two brackets, one on the auger and one on a piece of equipment already on the trailer. The employee sustained a partial amputation to the left thumb.

A temporary employee was bending rebar on a bending table (machine) when his right little finger got caught in the rollers. The employee sustained an amputation down to the first knuckle below the fingernail.

At 10:00 a.m., an employee was preparing to cut lumber for an A-frame structure using a compound miter saw when the saw kicked back and contacted his left hand. The employee sustained complete amputation of the thumb and a partial amputation of the index finger.

An employee was unloading a bundle of quartz slabs from a truck bed using a forklift and lifting slings. The employee was standing on the truck bed to secure the slings to the bundle when one of the two A-frames supporting the bundle fell over. The employee jumped off the truck bed to avoid being hit, causing them to strike the ground and sustain fractures to their left hip, femur, and elbow.

An employee fell from a dock to ground level (less than 4 feet) and broke their tibia/knee.

An employee was on the ground working to close a trailer door. The door was caught by the wind and blew the employee backward. He landed on his back and sustained four fractured ribs, requiring hospitalization.

An employee was walking on top of boiler to close a valve. The employee fell off the boiler and landed on the floor, sustaining fractured ribs. The employee was hospitalized.

An employee was exiting a loader and coming down the ladder. His hand slipped off the railing and he fell backward onto sandy ground, landing on his side. The employee was hospitalized with a fractured pelvis and a rotator cuff tear.

An employee's left bicep was lacerated by high-pressure water during water blasting operations. The employee was hospitalized.