DE PERE, WISCONSIN—
Builders First Source
Compressed or pinched by shifting objects or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury at Builders First Source, 3400 South Ridge Road, DE PERE, WISCONSIN 54115 on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
Employees were stacking two different types of trusses in a yard. One employee was lifting one end of a truss with a forklift while another inserted a spreader block. The load shifted, and the second employee's left ring finger was pinched between the block and the trusses. The finger was amputated.
More severe injuries at Builders First Source
OAKWOOD, GEORGIA—
Builders First Source
An employee was measuring a block on a pedal-operated upcut saw equipped with a 10 or 12 inch circular blade. As he was taking a measurement, the blade contacted his left hand, resulting in amputations of three fingers.
LEANDER, TEXAS—
Builders First Source
An employee had been installing door and inside trim at a location. The employee was cutting lumber with a chop saw and amputated his left middle and index fingers.
BREESE, ILLINOIS—
Builders First Source
An employee was behind a truck, preparing to dump one of two pallets of lumber from the truck's dump body (which had been raised so the lumber could be unloaded). The other pallet slid off the truck and struck the employee's lower leg, breaking it.
GEORGETOWN, TEXAS—
Builders First Source
An employee was unloading lumber from a railcar. Railcars have ladders welded to each side for employees to enter/exit. The employee was climbing down one of the railcar ladders and slipped and fell between 6 and 8 feet to the ground. The employee suffered a fractured back, dislocated shoulder, and laceration to the top of the head.
JAMESTOWN, NORTH DAKOTA—
Builders First Source
An employee was stepping out of his delivery truck onto the street when he slipped on an ice buildup, injuring his hip.
View Builders First Source's full OSHA safety record →
Similar incidents · Same event type
MECHANICSBURG, PENNSYLVANIA—
TForce Freight
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
DELAWARE CITY, DELAWARE—
Liveo Research, Inc.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
FORT WORTH, TEXAS—
Best Pump and Flow
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
BUFFALO, NEW YORK—
FORD MOTOR COMPANY
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
UNADILLA, GEORGIA—
Lasseter Tractor Company. Inc.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 321214)
OAKWOOD, GEORGIA—
The Carter Jones Lumber Company
An employee was spreading out wood on the live feed table. As he was operating the automatic feed saw, and the wood went in crooked and he went to straighten it. His left middle fingertip was crushed between the wood and the computer monitor. The employee's fingertip was amputated without loss of bone.
WASHINGTON COURT HOUSE, OHIO—
Stark Truss Company, Inc.
An employee was working on a conveyor belt in the chipper room that was not functioning. While inspecting the uncovered gearbox, the conveyor system started. The employee sustained an amputation to their right little finger. The conveyor system was not locked out at the time.
WILLOW LAKE, SOUTH DAKOTA—
Mayfield Truss, LLC
An employee was walking on a truss table when he lost his balance and fell approximately 3 feet to the floor. The employee sustained a dislocated and fractured left ankle.
OAKWOOD, GEORGIA—
CARTER LUMBER OF THE SOUTH, INC.
An employee was placing trusses on conveyor rollers to be stacked. The rollers could not roll the trusses, so the employee pulled the trusses onto the rollers. One of the spinning rollers caught their hand, resulting in three fingertip amputations.
HOUSTON, TEXAS—
Allied Truss Texas - Houston Plant
An employee reached down to pick up a box next to a roller conveyor. His gloved left hand was caught in the chain and pulled into the sprocket. Three fingers were injured: the middle and index fingers were cut to the bone, and the ring finger was amputated at the nail.
More severe injuries in WISCONSIN
MADISON, WISCONSIN—
RG Professional Carpenter, Inc.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
FRANKLIN, WISCONSIN—
General Thermodynamics, Inc.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
SAINT CLOUD, WISCONSIN—
Sargento Foods Inc
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
HIXTON, WISCONSIN—
Asher Enterprises, Inc.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
VERONA, WISCONSIN—
Consolidated Electrical Distributors Inc.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.