SCHOFIELD, WISCONSIN—
Crystal Finishing Systems, Inc.
Fall or jump from vehicle in normal operation, nonroadway · Skull fracture and intracranial injury
At a glance
Federal OSHA recorded a severe workplace injury at Crystal Finishing Systems, Inc., 4704 Bayberry St., SCHOFIELD, WISCONSIN 54476 on — Skull fracture and intracranial injury, affecting the brain.
Final narrative
An employee was a passenger in a golf cart when he fell out of the golf cart as it turned to enter the facility. He tried to gain his footing but fell backwards onto the concrete, hitting his head on the pavement. He suffered a skull fracture and subdermal hematoma.
More severe injuries at Crystal Finishing Systems, Inc.
MOSINEE, WISCONSIN—
Crystal Finishing Systems, Inc.
On May 8, 2024, at approximately 2:30 AM, two team members were retrieving a plate that popped out of the head puller/stretcher of an extrusion press and were putting it back into place using a crowbar and a small piece of aluminum. When the plate shifted back into place, the injured employee's right index finger was pinched under the plate and amputated.
MOSINEE, WISCONSIN—
Crystal Finishing Systems, Inc.
An employee was walking when she tripped over a basket sensor and reached for a nearby chain-link fence to brace herself. The employee's right middle finger became caught on the fencing causing an amputation to the finger that resulted in hospitalization and surgery.
MOSINEE, WISCONSIN—
Crystal Finishing Systems, Inc.
An employee was working in the extrusion department helping another employee remove a stuck ball of aluminum from the rollers of the roll-out table. The hot aluminum ball fell from the table and pinned the employee's leg against the table, resulting in second-and-third-degree burns to the employee's thigh and stomach.
SCHOFIELD, WISCONSIN—
Crystal Finishing Systems, Inc.
An aluminum extrusion became stuck while it was being pulled out onto the table from a press. While trying to free it, an employee was struck by the puller as it retracted back home to the press area. The employee suffered a broken rib, a punctured lung, and abrasions. The machine was not locked out/tagged out at the time.
SCHOFIELD, WISCONSIN—
Crystal Finishing Systems, Inc.
An employee had been fastening a wooden splash guard to the backside of a cleaning table in the Caustic Room using a power drill. He began to have trouble breathing and felt ill. The employee was hospitalized.
View Crystal Finishing Systems, Inc.'s full OSHA safety record →
Similar incidents · Same event type
SAN ANTONIO, TEXAS—
Allied Universal Security Services
An employee was patrolling a store using an electric patrol scooter when they lost their balance and sustained an ankle fracture.
CINCINNATI, OHIO—
Zenith Logistics, Inc.
An employee was operating a forklift to move panels around the dock area when the vehicle struck a joint where the two floors meet. The employee lurched forward and struck his head on the steering wheel. The employee then fell from the vehicle and sustained a dislocated disc in their back, requiring hospitalization.
SNELLVILLE, GEORGIA—
SouthernCarlson
An employee was standing inside a semi-trailer when the driver of the semi-trailer pulled away, causing the employee to fall backward and strike their head on a steel dock plate. The employee suffered a skull fracture, a fractured L1 vertebra, a broken coccyx, a laceration/abrasion to the head, and a brain bleed.
EL RENO, OKLAHOMA—
US Agricultural Research Services
An employee was riding an ATV, catching up with a stray cow to return it to a pen. The ATV tire struck a hole or other obstacle, causing the employee to be ejected and fall to the ground. His leg was broken and he was hospitalized.
HATFIELD, PENNSYLVANIA—
Manheim Philadelphia Auto Auction
An employee was driving a van in reverse when they fell out of the vehicle and landed on the ground in the parking lot. The employee sustained a fractured left hip.
More severe injuries in this industry (NAICS 423510)
PITTSBURGH, PENNSYLVANIA—
Triad Metals International
A load of steel angles was being lowered when the lifting chain hit the load, causing it to slide toward an employee. An angle slid and pinched the employee, catching both of their legs between the beams and an angle. The employee suffered two fractured legs.
BEDFORD PARK, ILLINOIS—
Ryder System Inc.
An employee was on the deck of a trailer helping a customer unload tubes. The employee was working to place a cargo strap on the remaining tubes using a winch bar when it slipped off the tubing, causing him to lose his balance and fall headfirst onto the asphalt lot below. The employee suffered a contusion on his forehead, resulting in hospitalization.
SARASOTA, FLORIDA—
EASTERN METAL SUPPLY, INC.
An employee and a customer were unloading two rectangular tubes. The tubes were wrapped together. The plastic wrap was cut so that one tube could be picked up. As the employee was lifting the top tube, the other tube (still connected to the top tube) came down onto his hand and broke two of his fingers. He was hospitalized.
HOUSTON, TEXAS—
TEXAS PIPE AND SUPPLY COMPANY
An employee was assisting as a forklift got pipe from a pipe rack. The employee was on one of the forklift's forks as it was raised to the top of the rack, a height of about 15 feet. He fell to the ground and suffered a dislocated and fractured right elbow.
HAMILTON, OHIO—
United Performance Metals, LLC
On September 23, 2025, at approximately 7:43 p.m., an employee was using a knife to cut poly banding from a metal coil. The knife slipped, causing a laceration to the inside of their left arm at the elbow joint. The employee was hospitalized and required surgery to repair a damaged vein.
More severe injuries in WISCONSIN
MADISON, WISCONSIN—
RG Professional Carpenter, Inc.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
FRANKLIN, WISCONSIN—
General Thermodynamics, Inc.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
SAINT CLOUD, WISCONSIN—
Sargento Foods Inc
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
HIXTON, WISCONSIN—
Asher Enterprises, Inc.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
VERONA, WISCONSIN—
Consolidated Electrical Distributors Inc.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.