Trade Mark Metals Recycling

An employee was running pipe into a hole on a rig floor. He was still running the other joint into the hole when the laydown machine shot the joint of pipe. The pipe hit the employee in the jaw and he fell backward, suffering a fractured cheekbone.

An employee was in the yard area on a forklift pulling lumber. Inclement weather began and the employee stopped the forklift and was walking to a safe location when they were struck by flying debris from the high winds or tornado. The employee sustained a leg fracture.

An employee was working at a job site when something flew into his eye. He was hospitalized with a cut on his cornea.

After reassembly work on a ready-mix truck, an employee turned the truck on to check for leaks. The employee was standing on the truck platform, about 3 feet off the ground, when he heard an air leak. As he was turning off the truck, a flying bolt from the plate assembly struck his forehead and broke his skull. He was hospitalized.

An employee was using an air hammer when a piece of metal struck their eye.

An employee was adjusting the tension on a grinder belt when three of their fingers got caught in the belt and pulley and were amputated.

A employee's left index finger was pulled into a capstan, resulting in a partial amputation.

An employee was cutting a metal square on a hydraulic shear when his left hand got caught between the metal and the shear block. The employee's middle finger was amputated.

An employee was uncoupling railcars while the cars were in motion and a car ran over her left lower leg, resulting in crush injuries and amputation below the knee. The employee was hospitalized.

An employee was working to remove a piece of wood that was jamming a transfer conveyor at the shredder. He used a tool to clear the jam, then reached to grab the wood. His sleeve got caught in the conveyor and his right arm was pulled into the pulley. The employee was hospitalized with an open fracture and a crush injury/laceration to his right forearm. The machine was running at the time.

An employee was helping a coworker transport a tall palm tree with a mini skid steer. The employee was severely shocked by a high-voltage electrical wire above the ground.

An employee was retrieving a Christmas tree from a shelf using a ladder. He missed a step and fell to the concrete floor. He sustained injury to his head and wrist.

An employee was inspecting a generator whose radiator was leaking. He slipped, and a fan blade in the generator amputated his thumb and index finger.

An employee was operating an agricultural tractor during sugarcane harvesting. The employee sustained a lumbar sprain due to vibration or motion from the tractor.

An employee was moving a 3-ton condensing unit, strapped down on a dolly, out of a garage. The strap broke, causing the employee to fall backward onto the brick pavered driveway. The employee suffered injury to a spinal ligament in the neck.