Gate Precast Company

On February 15, 2022, an employee was offloading 5 pieces of 1/2-inch bent plates that had a total weight of 1,225 pounds. The employee was using an overhead crane equipped with a new basket lift sling. Sharp edges on the bent plates cut through the lifting sling causing the plates to fall about 3 feet to the floor. One of the plates fell on the employee's right leg causing a laceration. The employee then developed a hematoma of his lower right leg and was hospitalized.

An employee was at a job site helping to unload a truck when the employee became overheated and dehydrated. The employee was hospitalized due to heat exhaustion.

The employee was on top of a rail car to level the grain that was deposited into the car when they fell 13-15 feet to the ground. The employee sustained a right leg fracture.

An employee was on an extension ladder installing a satellite dish on a roof when they fell approximately 12-15 feet to the ground. The employee sustained fractures.

An employee was setting a 5-foot pry bar into a precast concrete slab and stood on the end of the pry bar to move the slab into place. The pry bar slipped out causing the employee to fall backward 15.5 feet to the dirt ground. The employee was hospitalized with a broken leg.

An employee was on a step ladder to measure and mark a crane rail for modification. The employee fell approximately 12 to 15 feet to the ground, resulting in a fractured right hip.

An employee was on a trailer securing a load of logs when they fell approximately 9-12 feet to the ground. The employee sustained brain hemorrhaging and lacerations to the thigh and above the eye. The employee was hospitalized.

An employee was walking to exit the work area when steel walls fell on them, resulting in fractures.

Employees were working to apply sealant to a customer's leaking foundation. The injured employee was digging out dirt and passing it to another worker. The hole that was being dug collapsed and the injured employee became trapped in dirt/mud from the waist down. The employee sustained a fractured pelvis.

An employee was cutting a tack weld with a grinder when the grinder exploded. The employee sustained lacerations to their right index finger.

An employee was standing on a concrete wall, stripping concrete forms using a pry bar. The employee fell from the wall to the ground 9 feet below, suffering a fractured back and arm.

An employee was welding a beam when they fell 12 feet from a scissor lift to the ground. The employee sustained fractures to their face, thumb, and both wrists.

After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.

An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.

An employee was inspecting flares processes. The employee received burns to the front side of the body, face and arm from the flares.

An employee was removing plastic material from a production line when the machine cycled and amputated his left index, ring, and little fingers.

An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.