SHEBOYGAN, WISCONSIN—
Watry Industries LLC
Contact with hot objects or substances · Heat (thermal) burns, unspecified
At a glance
Federal OSHA recorded a severe workplace injury at Watry Industries LLC, 3312 Lakeshore Drive, SHEBOYGAN, WISCONSIN 53081 on — Heat (thermal) burns, unspecified, affecting the multiple body parts, unspecified.
Final narrative
An employee was charging an aluminum furnace by adding a solid aluminum ingot into the molten aluminum bath. When the ingot was added, an explosion occurred and the employee sustained burns to multiple parts of the body.
More severe injuries at Watry Industries LLC
SHEBOYGAN, WISCONSIN—
Watry Industries LLC
An employee was using a band saw to cut gating off of a part when the employee contacted the saw blade, resulting in an amputation to the right middle fingertip.
SHEBOYGAN, WISCONSIN—
Watry Industries LLC
An employee was moving a piece of aluminum into a furnace. The aluminum fell off the forklift that was transporting it, landed in molten aluminum, and created a splash that caused molten aluminum to burn the employee's arm.
View Watry Industries LLC's full OSHA safety record →
Similar incidents · Same event type
BAY CITY, TEXAS—
OQ Chemicals
An employee connected a steam line to a hose to clean equipment when the fitting broke loose. They were struck by steam in the left inner thigh, resulting in burns that required hospitalization.
HAUPPAUGE, NEW YORK—
Husbe Zoaq
An employee was straining hot water from a pot of rice when the water splashed onto them, resulting in burns to their chest, arms, shoulder, and back.
FORT WORTH, TEXAS—
The Cumberland Rest Inc. dba Trinity Terrace
An employee was making tea when she noticed tea grinds were collecting on the side and water was no longer dripping through the funnel. The employee was checking the funnel when boiling water and tea grinds spilled onto the left side of her body. The employee sustained burns to her neck, back, and arm.
SAN ANTONIO, TEXAS—
Mueller & Wilson Inc
An employee had turned off the ball valve on a waterpipe system and was removing the plug when the coupling system attached to the strainer came apart. Hot water sprayed on his arm and back, resulting in first- and second-degree burns that required surgery.
MADILL, OKLAHOMA—
Oklahoma Steel & Wire Co., LLC
An employee was using a shovel to remove waste vermiculite from molten zinc. The metal had been placed in a bin and partially hardened. The employee broke through the partially hardened metal; still-molten metal flowed to the employee's steel-toed right boot and entered through the cloth boot tongue. The employee suffered a third-degree burn to the right foot and was hospitalized.
More severe injuries in this industry (NAICS 331524)
ENID, OKLAHOMA—
Parrish Enterprises
An employee was grinding raw couplings on a belt sander to shave off excess material left by the manufacturing process. The employee's right hand slipped while he was pressing a part to the sander, causing his right thumb to come into contact with the sanding belt. The thumb was lacerated and broken, and the employee was hospitalized, requiring surgery.
ATHENS, ALABAMA—
Cast Products Inc
An employee was buffing a corner casting when the rotating belt contacted her right hand, resulting in an amputation of the first segment of her right thumb.
NEW BERLINVILLE, PENNSYLVANIA—
Boyertown Foundry Co.
An employee was assembling boilers, which involved stacking the flat sections of boilers on top of one another and pushing them down a non-powered roller line. While the employee was pushing a stack onto the next set of rollers, the stack became crooked. The employee went to pull back the stack to straighten it when their finger was pinched by a roller. The employee sustained a partial amputation to their left ring fingertip.
OPELIKA, ALABAMA—
Car Tech LLC
An employee was operating a projection welding press when the weld bit contacted her left hand, causing an amputation of the index fingertip.
OPELIKA, ALABAMA—
Car Tech LLC
On June 25, 2025, at 7.30 a.m., an employee was using a remote-controlled crane to change a die in a 2,600-ton press. They were releasing crane cables from the die when one cable did not release, causing the die to lift and pin the employee between the press and the die. The employee suffered a closed non-displaced fracture of the pelvis.
More severe injuries in WISCONSIN
MADISON, WISCONSIN—
RG Professional Carpenter, Inc.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
FRANKLIN, WISCONSIN—
General Thermodynamics, Inc.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
SAINT CLOUD, WISCONSIN—
Sargento Foods Inc
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
HIXTON, WISCONSIN—
Asher Enterprises, Inc.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
VERONA, WISCONSIN—
Consolidated Electrical Distributors Inc.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.