J & J SNACK FOODS SALES CORP.

An employee was sweeping behind a guardrail and stepped on the lower portion of the guardrail when he lost his balance. As he stepped back, his foot became stuck between the guardrail and a transformer, resulting in a compound fracture of left tibia and fibula.

An employee was repositioning a chill adder so that the pig tubs behind it could be removed. The employee lost their balance and their finger was pinched between the chill adder and the pig tub, resulting in a fingertip amputation.

An employee was backing up a stand-up forklift. The vehicle struck a guard and a wooden table. Upon exiting the forklift, the employee's left leg became caught between the table and dock guard, causing a fractured leg.

An employee was working on a shoring scaffold with another employee to strip plywood from cement. The employees threw a 4x4 piece of forming down and it got stuck on the beam of the scaffold. The injured employee went to grab the forming when their left ring fingertip was pinched between it and the beam, resulting in a partial amputation.

An employee was using a torch to trim the foundation for a compressed air tank so the tank would fit in place. His left hand was caught between the tank and the steel bar foundation structure; the hand was crushed and burned.

An employee was attempting to straighten a wooden pallet with a bar. The pallet was positioned on top of a frame conveyor system 1 foot off of the ground. While maneuvering the bar, the employee lost balance and fell backward onto the concrete floor, extending their right hand to catch themselves as they fell. The employee suffered two fractured bones in their wrist and one fractured bone in their right hand.

An employee was working near a conveyor when his left middle finger was caught in the conveyor. The employee required surgery and their finger was partially amputated.

An employee was filling a hopper that deposited blueberries in muffin trays. Two plastic plates inside the equipment closed, pinching and amputating the employee's left ring fingertip. The equipment was running and unguarded at the time.

An employee was returning a catch pan to a machine after dumping fruit out of it. The employee's hand was caught in a roller in the conveyor area of the fruit inspection line, and the employee's right arm was broken.

An employee had been using soap and a towel to clean a slicer. They were finishing the cleaning procedure when the power switch was activated. The slicer turned on while the employee's right ring finger was in the blade gap and the blade amputated their fingertip without bone loss.

An employee tripped over a stool and fell on the floor, resulting in a left displaced mid-cervical femoral neck fracture.

An employee was installing fence posts when they stepped into a recently dug hole that was not visible due to rainfall. The employee's leg was fractured.

An employee assisted in cleaning material from a conveyor pit. After the pit was cleaned, the employee proceeded to replace metal safety plates to ensure other employees did not fall into the pit. While replacing one of the last plates, the employee mis-stepped and fell approximately 5 feet into the pit. The employee was hospitalized with back/side bruising, elbow bruising, bone bruises, and/or fractured ribs.

An employee was inspecting a breaker box and turning on/off a circuit breaker when he was electrocuted.

An employee was walking on the sidewalk. When they stepped off the curb, they fell to the ground, resulting in fractures to their tibia, fibula, and a metatarsal.