Struck by object falling from vehicle or machinery-other than vehicle part · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Otis Elevator, 4303 Grinnell Blvd, COLORADO SPRINGS, COLORADO 80916
on — Fractures, affecting the multiple body parts, n.e.c..
Final narrative
An employee was monitoring parts of an elevator being moved off a transport truck when a piece of the elevator fell and struck the employee, resulting in a fractured right ankle and fractured ribs.
HospitalizedMultiple body parts, n.e.c.Machine and appliance parts, unspecified
An employee was holding the toe board of an elevator while installing it. The toe board slipped and contacted their pinky finger resulting in a laceration and fracture to the pinky finger.
While repairing an elevator's counterweight, the mechanic isolated the counterweight by wedging a tool under it. The wedging tool dislodged, the counterweight moved, and the mechanic got his hand caught by the moving cable into the guard of the sheave. The incident de-gloved his hand and caused the skin to be ripped from the bone.
An employee was transporting an 800-pound die on a cart from the tool room. The employee was pulling the cart when it struck a metal plate on the floor. This caused the cart to tip forward and the die to slide off the cart. The die struck the employee's left foot and their second toe was amputated.
An employee was using a forklift to load pallets of product on a trailer. He exited the forklift to adjust a pallet by hand. The pallet fell on him, resulting in an injury to the left leg.
An employee was lifting a 500-pound steel counterweight off a pallet using a magnetic hold jib crane. The counterweight detached from the crane and the employee sustained a left foot/toe fracture that required surgery.
An employee was using a pipe wrench to turn a 42-foot-long steel pipe on jack stands to weld the bottom portion. The pipe fell off the stands, striking the injured employee on his left shin. The employee sustained a left leg fracture at the shin area as well as a tibia fracture that required surgery.
More severe injuries in this industry (NAICS 333921)
An employee walked into the chairlift hoist way and the chairlift platform was not there. The employee fell 10-12 feet to the chairlift platform on the first floor. The employee sustained a fractured femur.
An employee was dumping trash into a compactor when he lost his balance and fell approximately 5 feet into the trash compactor. The compactor was not in use at the time. The employee was hospitalized with multiple fractures.
Employees were installing components of an elevator from inside the elevator and removed temporary hoisting equipment when the elevator descended from the fourth floor to the pit floor. One employee was hospitalized with fractures to their fibula and a rib, and the other employee was hospitalized with fractures to both feet.
An employee was standing on the edge of the dumpster while pulling out cribbage. The employee fell to the ground, sustaining a fractured elbow and hip. The employee was hospitalized.
An employee was using a magnetic drill to drill a hole on an elevator door. His left glove became entangled with the drill bit, which partially amputated his left thumb below the last knuckle and removed several inches of a tendon. The employee's left middle finger was also severely lacerated. He was hospitalized and received stitches.
An employee was delivering materials. He was doing his pre-delivery inspection on the roof of the jobsite (a warehouse) when he fell through a plexiglass skylight. He landed on his feet on the concrete floor 14 feet below. The employee sustained fractures to his spine, left ulnar/radius, and right heel. The employee required surgery.
An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.
A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.
An employee was standing on an extension ladder, using a torquing tool to remove bolts that secured blades to a rotor. When the torquing tool activated, its reaction arm came around and pinched the employee's right middle finger against a lifting eye. His fingertip was amputated.