YASUFUKU USA, INC.

An employee was cutting parts using a bandsaw. The employee's left wrist contacted the sawblade and was severely lacerated, causing an amputation. The blade was unguarded at the time.

An employee was pulling a tool cart that had a grease gun hanging on the side. While going through a doorway the trigger of the grease gun was pressed. The employee's right ring fingertip was amputated by the trigger mechanism of the grease gun.

An employee was removing a rubber mold with his hands when the mold closed onto his pinky finger. A portion of the employee's pinky finger was medically amputated.

An employee was changing a saw blade when the saw machine activated. The employee's left ring and little fingers were amputated.

An employee was clearing a jam from the label cutting machine when their left middle finger was partially amputated.

Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.

An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.

An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.

An employee was working in the mixing department in an indoor warehouse when he began to sweat and cramp. He sustained heat exhaustion.

An employee was operating a rubber roller grinder and had just completed the grinding process. He changed the rotation of the spindle to the clockwise position and began to clean rubber dust off the rollers with a shop rag. The rag caught on the roller and pulled his hand into the grinding wheel, resulting in a broken wrist, broken fingers, and lacerations to the hand and fingers. He was hospitalized.

An employee was clearing jammed material from an extruder machine. The employee reached their left hand through the unguarded opening between the extruder machine and the conveyor belt to manually dislodge the jam and contacted the moving chain and sprockets, resulting in an amputation to the left thumb.

At about 10:05 a.m. on March 10, 2025, an employee was working at the loading side of a mix conveyor when his right wrist was caught in a pinch point between the conveyor and a roller. He suffered laceration and fracture injuries to the wrist and was hospitalized.

An employee was manually adjusting a mold on a shuttle plate when the mold shifted, resulting in amputation of his right middle fingertip.

An employee was stacking concrete blocks for a concrete bunker. As a block was swinging into place, the employee's left leg was pinched between two blocks, resulting in injuries to his left heel and lower leg.

An employee was climbing a ladder to inspect a vent in a restaurant dining area. The ladder slid out on the floor and the employee fell approximately 12 feet onto the ladder and the floor. He was hospitalized with a dislocated shoulder and a back injury.

An employee was rappelling down a tree. When he was most of the way down, he fell on the ground and suffered a broken pelvis.

An employee was filtering a fryer with a fryer filter machine. After going around the corner and then returning to the fryers, the employee stepped into the filter machine. The hot oil burned the employee's right ankle, and the employee was hospitalized.

An employee was cleaning out corn from a grain bin. The sweep auger in the bin was activated and caught his trouser leg. His leg was pulled into the auger, which injured his calf and caused leg fractures and lacerations.