Injured by slipping or swinging object held by injured worker · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at YASUFUKU USA, INC., 3201 N.W. 12TH ST., LINCOLN, NEBRASKA 68521
on — Amputations, affecting the fingertip(s).
Final narrative
An employee was pulling a tool cart that had a grease gun hanging on the side. While going through a doorway the trigger of the grease gun was pressed. The employee's right ring fingertip was amputated by the trigger mechanism of the grease gun.
An employee was cutting parts using a bandsaw. The employee's left wrist contacted the sawblade and was severely lacerated, causing an amputation. The blade was unguarded at the time.
An employee was removing a rubber mold with his hands when the mold closed onto his pinky finger. A portion of the employee's pinky finger was medically amputated.
An employee was using a saw to cut a piece of concrete when the piece gave way and pushed the saw into the employee's leg. The employee's leg was lacerated, requiring stitches and hospitalization.
An employee was grinding some hardfacing on a bulldozer blade when the 9-inch grinder kicked back and lacerated his left leg above the knee. The employee was hospitalized and required surgery.
An employee was operating a rotating tool to place thread protectors on the end of pipe. Her left hand was on the rotating part of the tool when the tool engaged, resulting in a left forearm fracture and a thumb laceration.
More severe injuries in this industry (NAICS 326291)
An employee was operating a rubber roller grinder and had just completed the grinding process. He changed the rotation of the spindle to the clockwise position and began to clean rubber dust off the rollers with a shop rag. The rag caught on the roller and pulled his hand into the grinding wheel, resulting in a broken wrist, broken fingers, and lacerations to the hand and fingers. He was hospitalized.
An employee was clearing jammed material from an extruder machine. The employee reached their left hand through the unguarded opening between the extruder machine and the conveyor belt to manually dislodge the jam and contacted the moving chain and sprockets, resulting in an amputation to the left thumb.
At about 10:05 a.m. on March 10, 2025, an employee was working at the loading side of a mix conveyor when his right wrist was caught in a pinch point between the conveyor and a roller. He suffered laceration and fracture injuries to the wrist and was hospitalized.
An employee was stacking concrete blocks for a concrete bunker. As a block was swinging into place, the employee's left leg was pinched between two blocks, resulting in injuries to his left heel and lower leg.
An employee was climbing a ladder to inspect a vent in a restaurant dining area. The ladder slid out on the floor and the employee fell approximately 12 feet onto the ladder and the floor. He was hospitalized with a dislocated shoulder and a back injury.
An employee was filtering a fryer with a fryer filter machine. After going around the corner and then returning to the fryers, the employee stepped into the filter machine. The hot oil burned the employee's right ankle, and the employee was hospitalized.
An employee was cleaning out corn from a grain bin. The sweep auger in the bin was activated and caught his trouser leg. His leg was pulled into the auger, which injured his calf and caused leg fractures and lacerations.