Aquamar, Inc.

An employee was using tongs to grab shrimp when their finger got caught inside the tongs. The employee sustained an amputation to their fingertip.

An employee was clearing a jam in a machine. The employee's right thumb became stuck in the machine and the employee suffered a laceration and removal of the nail.

A temporary employee was tasked with releasing water from the pasteurizer. As she opened the main double doors, boiling water was released and the employee suffered burns to her hands and legs while closing the doors.

An employee was changing mud cups in the hopper cylinders of a concrete pump truck. The cylinders moved and three of the employees fingers were amputated.

An employee was standing on the rig floor next to a polishing unit. His hand was placed on the polishing unit when the pump was lowered, resulting in amputation of their right thumb, ring, and middle fingertips.

An employee was using air to blow out the air wash to the blender and grinder station. As the employee reached to verify that the air wash was clean, the unit pinched and amputated their fingertip.

An employee was retrieving a lost drill pipe with a lifting bail when their left thumb got pinched between the table and handle of the lifting bail while trying to re-thread the pipe to lift it out. The employee suffered an amputation to the left thumb.

An employee was removing a core chuck from a stationary roll when their right ring finger was pinched between the chuck and the roll. The employee's fingertip was amputated.

An employee was working on a fillet machine when it caught his right little finger, lacerating and breaking it.

An employee was cutting a fish hung up on a hook using a knife when the hook came off, causing his hand to slip. The employee's right thumb was severely lacerated by the knife.

An employee was clearing a jam in a fish skinning machine when his hand became caught between two plastic cogs that operate the conveyor belt. His hand was injured and required surgery. His left index finger was surgically amputated. The machine was energized at the time of the incident.

An employee was in a tunnel freezer, which was being turned on for the first time. The baffling for the evaporator fan got stuck in the siding. The employee ascended a 5'9"-tall cart to reach the raised baffling panel. The raised baffling shifted and dropped, trapping the employee's arm between the aluminum and foam core baffling. The employee sustained a severe laceration to the lower forearm/upper wrist and severed ligaments. The employee was hospitalized.

An employee was using tongs to grab shrimp when their finger got caught inside the tongs. The employee sustained an amputation to their fingertip.

An employee tripped over a stool and fell on the floor, resulting in a left displaced mid-cervical femoral neck fracture.

An employee was installing fence posts when they stepped into a recently dug hole that was not visible due to rainfall. The employee's leg was fractured.

An employee assisted in cleaning material from a conveyor pit. After the pit was cleaned, the employee proceeded to replace metal safety plates to ensure other employees did not fall into the pit. While replacing one of the last plates, the employee mis-stepped and fell approximately 5 feet into the pit. The employee was hospitalized with back/side bruising, elbow bruising, bone bruises, and/or fractured ribs.

An employee was inspecting a breaker box and turning on/off a circuit breaker when he was electrocuted.

An employee was walking on the sidewalk. When they stepped off the curb, they fell to the ground, resulting in fractures to their tibia, fibula, and a metatarsal.