Caught in running equipment or machinery during regular operation · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Michelin North America, Inc., 1101 MICHELIN ROAD, ARDMORE, OKLAHOMA 73401
on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
An employee was operating the tire building machine at the first stage of the cycle. The employee was holding a wire bead rope material utilized in the manufacturing process. The material became caught in the machine and pulled the employee's left hand into the machine while his foot was stuck in the operation pedal. The employee suffered amputation of the left middle finger at the middle knuckle and a left ankle dislocation with a fracture.
AmputationFinger(s), fingernail(s), n.e.c.Special process machinery, n.e.c.
More severe injuries at Michelin North America, Inc.
An employee was removing rubber that was jammed on an applicator of a tire assembly machine. As the jam was removed, the machine cycled and the employee's right hand became caught against the heated anvil on the machine, resulting in a full-thickness burn to their palm and wrist that required hospitalization and surgery.
An employee was inspecting a rubber dust collector when his hand contacted a powered rotor, resulting in partial amputations to three right-hand fingers.
An employee was operating a tugger truck. While backing up and turning, the employee's ankle/shin became pinned between a guardrail and the vehicle. The employee sustained a right leg fracture.
An employee was putting crushed 55 gallon drums in a dumpster into a recycle trailer using a forklift. The dumpster was raised about 5.5 feet off the ground on the forks of the forklift. As the dumpster rolled forward, their left index finger was pinched between the dumpster frame and the forklift fork and the fingertip was amputated.
An employee was walking between the tines of a stationary forklift when a nearby forklift struck the stationary vehicle, causing the tines to strike the employee. The employee was hospitalized for a leg injury.
An employee was sharpening peeler blades when their shirt was caught in the grinding wheel. The employee sustained tendon damage and a crushed right hand.
An employee was preparing to cut lumber on a panel saw when the clamp engaged and caught the employee's left middle finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 326211)
On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.
An employee was adjusting a pallet on a conveyor when it came off the conveyor and struck his right ankle, breaking the tibia and fibula. The employee was hospitalized.
At 2:45 p.m., an employee was outside the plant during a break before his next shift. He was speaking with an associate when he suddenly fell from the third-level steps to the ground, striking his head on the concrete. The employee was hospitalized due to internal brain bleeding, a wound to the back of his head requiring staples, and heat-related dehydration.
Two employees were replacing a motor on an overhead conveyor. The old motor fell to the floor, causing a piece of the concrete floor to fly up and strike the injured employee in the face, around the eye. The injured employee sustained a right orbital fracture, a zygomatic arch fracture, and a sphenoid fracture. The employee was hospitalized and required surgery.
An employee was changing the bladder on a hydraulic press. As he lowered the bladder, his left foot was pinned between its bottom ring and the bottom mold of the press. The second toe on the foot was amputated.
An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.
An employee was working in the food service warehouse when he experienced chest pain, difficulty breathing, and lost consciousness. The employee sustained carbon monoxide poisoning.
An employee was cutting a piece of metal rod with a metal cutting machine. His right middle finger became caught between the rod and the machine's table. The employee's fingertip was partially amputated.
An employee was working at her desk. She went to stand up and fell to the floor beside the desk. The employee sustained a hip displacement and required surgery.
An employee was processing wood boards at a chop saw when the saw malfunctioned and the blade cut her left hand and fingers. She was hospitalized and her little finger was surgically amputated.