Pedestrian struck by vehicle propelled by another vehicle in nonroadway area · Soreness, pain, hurt-nonspecified injury
At a glance
Federal OSHA recorded a severe workplace injury
at Michelin North America, Inc., 1101 Michelin Road, ARDMORE, OKLAHOMA 73401
on — Soreness, pain, hurt-nonspecified injury, affecting the leg(s), unspecified.
Final narrative
An employee was walking between the tines of a stationary forklift when a nearby forklift struck the stationary vehicle, causing the tines to strike the employee. The employee was hospitalized for a leg injury.
HospitalizedLeg(s), unspecifiedForklift, order picker, platform truck-powered
More severe injuries at Michelin North America, Inc.
An employee was removing rubber that was jammed on an applicator of a tire assembly machine. As the jam was removed, the machine cycled and the employee's right hand became caught against the heated anvil on the machine, resulting in a full-thickness burn to their palm and wrist that required hospitalization and surgery.
An employee was inspecting a rubber dust collector when his hand contacted a powered rotor, resulting in partial amputations to three right-hand fingers.
An employee was operating a tugger truck. While backing up and turning, the employee's ankle/shin became pinned between a guardrail and the vehicle. The employee sustained a right leg fracture.
An employee was putting crushed 55 gallon drums in a dumpster into a recycle trailer using a forklift. The dumpster was raised about 5.5 feet off the ground on the forks of the forklift. As the dumpster rolled forward, their left index finger was pinched between the dumpster frame and the forklift fork and the fingertip was amputated.
An employee was winding envelopes into a take-up bobbin. The machine caught the employee's right hand and forearm, tearing muscles and tendons and breaking bones from the hand up to the forearm. He was hospitalized, and his hand was medically amputated up to the forearm.
An employee parked their cart near a wrapping machine. As the employee was getting out of their cart, a forklift struck the cart. The employee's leg was pinned between their cart and a parked cart, resulting in a leg injury that required hospitalization.
An employee had just replaced the passenger-side rear panel of a stake truck and was latching the panels together. A freight truck pulled away from the loading dock and struck the vehicle the employee was working on, pushing the vehicle into the employee and pinning him between the vehicle and a roll-off dumpster. He suffered a hip fracture.
Employees were setting up to offload an aircraft. The injured employee was standing near a baggage tractor by the right wing of the plane. A belt-loader was being driven from the nose of the aircraft to the aft when it struck the parked baggage tractor. The injured employee was pinned between the belt-loader and the baggage tractor and sustained a dislocated left knee.
An employee was hand-picking orders while standing near an order picker forklift. A co-worker was operating a turret forklift nearby when it struck the order picker forklift, which rolled over the employee's left foot. The employee suffered an injury to their big toe that required hospitalization and surgery.
A car wash employee was preparing a vehicle for a wash when a second vehicle pulled behind it and accelerated, striking the vehicle in front. The employee's left leg was struck, resulting in left lower leg and ankle fractures.
More severe injuries in this industry (NAICS 326211)
On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.
An employee was adjusting a pallet on a conveyor when it came off the conveyor and struck his right ankle, breaking the tibia and fibula. The employee was hospitalized.
At 2:45 p.m., an employee was outside the plant during a break before his next shift. He was speaking with an associate when he suddenly fell from the third-level steps to the ground, striking his head on the concrete. The employee was hospitalized due to internal brain bleeding, a wound to the back of his head requiring staples, and heat-related dehydration.
Two employees were replacing a motor on an overhead conveyor. The old motor fell to the floor, causing a piece of the concrete floor to fly up and strike the injured employee in the face, around the eye. The injured employee sustained a right orbital fracture, a zygomatic arch fracture, and a sphenoid fracture. The employee was hospitalized and required surgery.
An employee was changing the bladder on a hydraulic press. As he lowered the bladder, his left foot was pinned between its bottom ring and the bottom mold of the press. The second toe on the foot was amputated.
An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.
An employee was working in the food service warehouse when he experienced chest pain, difficulty breathing, and lost consciousness. The employee sustained carbon monoxide poisoning.
An employee was cutting a piece of metal rod with a metal cutting machine. His right middle finger became caught between the rod and the machine's table. The employee's fingertip was partially amputated.
An employee was working at her desk. She went to stand up and fell to the floor beside the desk. The employee sustained a hip displacement and required surgery.
An employee was processing wood boards at a chop saw when the saw malfunctioned and the blade cut her left hand and fingers. She was hospitalized and her little finger was surgically amputated.