Struck by rolling object or equipment-other than powered vehicle, n.e.c. · Fractures and other injuries, n.e.c.
At a glance
Federal OSHA recorded a severe workplace injury
at Lockheed Martin Corporation, 1 Lockheed Boulevard, FORT WORTH, TEXAS 76108
on — Fractures and other injuries, n.e.c., affecting the multiple trunk locations.
Final narrative
A walking tug operator was helping move an aircraft from a test facility turntable. The handle on the tug struck him in the abdomen, pushed him backward into a large external overhead door, and pinned him against it. He suffered broken ribs, a liver laceration, and a broken back vertebra.
HospitalizedMultiple trunk locationsMaterial and personnel handling machinery, n.e.c.
More severe injuries at Lockheed Martin Corporation
An employee was exiting the maintenance building when she tripped and fell on a paved incline walkway. She caught herself with her left hand and was hospitalized with a fractured left wrist that required surgery.
On November 28, 2023, an employee was working on an aircraft. They had used a work-stand, or portable/rolling staircase, to enter the aircraft. When the employee stepped backward to exit the aircraft, the work stand was not there, causing the employee to fall approximately 46 inches to the concrete floor. The employee was hospitalized with fractured ribs, contusions/abrasions to left elbow, and a bruised back.
On July 28, 2023, an employee was preforming maintenance on a military vehicle when they fell 4 feet to the ground, resulting in a fractured L1 vertebra.
On February 1, 2023, an employee slipped while walking between two office cubicles. The employee landed on their left knee and suffered a hairline fracture to the kneecap.
On September 1, 2022, at approximately 2:10 p.m., an employee was testing the re-tooling on a metal CNC machine. As the employee grabbed the tool, it began to spin cutting flesh off the bottom portion of left ring finger and resulting in an avulsion that required hospitalization.
An employee was pushing carts into the chute area for customers to retrieve. The first of six carts struck the wall and caused the other carts to bounce back and strike the employee. The carts knocked the employee to the ground and she sustained a back injury.
An employee was loading a portable storage container onto a dovetail trailer. This requires hooking up a bridle to the container and lifting the container enough for the dovetail to begin to slide under it. The employee reached and held the bridle lock to allow the trailer to move under it when the trailer moved backward instead of forward and caught his finger. The employee's right middle finger was amputated between the fingernail and the first knuckle.
An employee was reaching over a small stack of steel billets on the ground to cut a strap. When the strap was cut, one of the billets (weighing 5,182 pounds) rolled down onto his right leg. He was pinned and suffered a broken tibia. The incident occurred while the employee was training.
On June 7, 2023, employees were unloading a box truck and rolling a reel of 2-inch plastic pipe to the back of the truck. As the employees were rolling the reel, the edge of the steel frame of the reel contacted the side of the truck. The injured employee s right little finger was caught between the reel and the truck, resulting in a laceration and fracture as well as a little finger amputation.
Employees were using a dolly to remove a trash compactor unit from a residential home. As they began to transport it out of the room and to the outside, the dolly encountered uneven ground. This caused the dolly and the unit to move quicker than expected. The injured employee's left hand was then caught between a nearby concrete column and the compactor unit, resulting in fractures of the left ring and middle fingers that required amputation.
More severe injuries in this industry (NAICS 336411)
A pressurized aircraft nose landing gear strut assembly was being disassembled. The gland nut dislodged under pressure and made contact with an employee's left hand, breaking it.
A metal tooling base was being moved by a forklift when the load shifted. An employee who was assisting went to stabilize the load and prevent it from sliding off the forks. The C-channel of the base crushed the employee's left hand against the concrete ground, resulting in the amputation of their third and fourth fingers.
An employee was working on a tool platform (47.5" tall) and was transitioning around to the other side when they lost balance and fell to the concrete floor. The employee was hospitalized with fractures to seven ribs and their elbow.
On August 19, 2025, at 6:30 a.m., an employee sat in the rear bench seat of a golf cart ahead of being driven to a parking lot. When the golf cart began to move, he fell off the cart and onto the ground, resulting in a fractured right hip.
After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.
An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.
An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.