PARSONS, KANSAS—
CST Industries, Inc.
Ignition of clothing from controlled heat source · Heat (thermal) burns, unspecified
At a glance
Federal OSHA recorded a severe workplace injury at CST Industries, Inc., 2101 S 21st St., PARSONS, KANSAS 67357 on — Heat (thermal) burns, unspecified, affecting the chest, except internal location of diseases or disorders.
Final narrative
An employee was grinding on metal when sparks from the grinder caught their shirt on fire, resulting in burns on the right side of the employee's upper torso.
More severe injuries at CST Industries, Inc.
PARSONS, KANSAS—
CST Industries, Inc.
An employee was placing parts onto a sawhorse with a crane. The parts started rocking; his finger was caught between them and the sawhorse, and the fingertip was amputated. He was hospitalized, undergoing surgery.
PARSONS, KANSAS—
CST Industries Inc
An employee was manually moving material to a roller. His hand was on the leading edge when his left middle finger was caught between the material and the roller.
PARSONS, KANSAS—
CST Industries Inc
Worker operating a small press brake was struck in the neck by the piece that was being bent. The worker passed out, fell over a stool/chair, and struck his head on the concrete floor. He was transported to the local hospital in Parsons where he was treated, and then transported to Via Christi in Wichita where he remains hospitalized.
View CST Industries, Inc.'s full OSHA safety record →
Similar incidents · Same event type
FAIRLESS HILLS, PENNSYLVANIA—
Falls Manufacturing Company/a U-Haul Co.
An employee was welding metal parts. The employee turned to the left and their work uniform came in contact with the location on the part that had just been welded. The employee's uniform ignited, causing burns to their shoulder and back.
CORDELE, GEORGIA—
Flint Ag & Turf
An employee was using a small propane heater when they sustained third-degree burns to the left buttock and second-degree burns to the back and neck.
WAYNESBORO, PENNSYLVANIA—
Novae, LLC.
An employee was welding steel dump ramp slides. He leaned over and a previous weld caught his hoodie on fire. The employee sustained burns on his left side from the armpit to the waistline.
LEWISBURG, PENNSYLVANIA—
Pik Rite Inc.
An employee was using a fiber wheel to cut a 55-gallon drum to make a trash can. As they were cutting, sparks flew into the barrel and fire came out of a hole on the barrel, catching the employee's shirt on fire. The employee sustained burns to their abdomen and chest, requiring hospitalization.
KILLDEER, NORTH DAKOTA—
DC Power Tong, LLC
An employee was removing tubing caps and cleaning tubing ends with solvent. Their flame-resistant pants became soaked with the cleaning solvent and were ignited by a propane torch used for removing tubing caps. The employee was hospitalized with burns to their legs.
More severe injuries in this industry (NAICS 332311)
MCALESTER, OKLAHOMA—
Meeco Sullivan
An employee was cutting a piece of metal rod with a metal cutting machine. His right middle finger became caught between the rod and the machine's table. The employee's fingertip was partially amputated.
LOUISVILLE, GEORGIA—
CSBS Manufacturing LLC
Two maintenance employees were dismantling a machine part (steel cylindrical rollers) on the ground. After unbolting a portion, part of the assembly fell approximately 6 inches onto one employee's left little finger. The employee was hospitalized and about 3/4" of their little finger above the top joint was surgically amputated.
NEW DEAL, TEXAS—
Standard Structures, Inc.
An employee was moving and handling cardboard boxes when he sustained a laceration to his left ring finger from a box. The laceration became infected and required hospitalization and surgery.
KERRVILLE, TEXAS—
Prime Metal Buildings & Components
An employee was positioning a piece of metal trim for a test bend in a single-fold bend machine. Their right middle fingertip was pinched by a clamp on the machine, resulting in a partial amputation.
DUBLIN, TEXAS—
Prime Metal Buildings & Components
An employee was operating a double folding machine and positioning a piece of metal trim in the folding clamps for a test bend. The machine activated and the crank (lower control arm that bends the trim) came up and cut through the employee s glove, amputating their right middle fingertip.
More severe injuries in KANSAS
WATHENA, KANSAS—
Omya Inc.
An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.
COFFEYVILLE, KANSAS—
John Deere Coffeyville Works
An employee was moving a rack onto a lower conveyor in the south heat treat area when their finger got caught between the part tray and the rollers, resulting in a fingertip fracture and amputation.
HAVEN, KANSAS—
Haven Steel Products Inc
An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.
MINNEOLA, KANSAS—
Vestas-American Wind Tech
Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.
MEADE, KANSAS—
Alliance Ag and Grain LLC
An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.