Ignition of clothing from controlled heat source · Heat (thermal) burns, unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at Novae, LLC., 4763 Zane A Miller Drive, WAYNESBORO, PENNSYLVANIA 17268
on — Heat (thermal) burns, unspecified, affecting the multiple trunk locations.
Final narrative
An employee was welding steel dump ramp slides. He leaned over and a previous weld caught his hoodie on fire. The employee sustained burns on his left side from the armpit to the waistline.
An employee was welding metal parts. The employee turned to the left and their work uniform came in contact with the location on the part that had just been welded. The employee's uniform ignited, causing burns to their shoulder and back.
An employee was using a fiber wheel to cut a 55-gallon drum to make a trash can. As they were cutting, sparks flew into the barrel and fire came out of a hole on the barrel, catching the employee's shirt on fire. The employee sustained burns to their abdomen and chest, requiring hospitalization.
An employee was removing tubing caps and cleaning tubing ends with solvent. Their flame-resistant pants became soaked with the cleaning solvent and were ignited by a propane torch used for removing tubing caps. The employee was hospitalized with burns to their legs.
An employee was welding a kick bar onto the rear of a hopper on a trash truck. His clothing caught fire, resulting in second- and third-degree burns to his chest and stomach area.
More severe injuries in this industry (NAICS 336214)
An employee was working to dislodge a small piece of wood that had become stuck in a wood molder. The employee's glove became entangled in the machine's cutter head and the employee suffered a partial amputation to a finger on the right hand.
An employee was rolling a piece of structural channel on a roller table when the channel collided with steel tubing that was sitting on the roller table. One of the employee's fingers was hanging down over the piece of channel, and when it collided with the tube, their fingertip was severed. Approximately half of an inch of the employee's fingertip was amputated.
On November 21, 2024, an employee was operating a punch press running stone guard brackets. The press cycled while they were placing a part into the die, crushing their right hand. The employee was hospitalized with crushing injuries to their ring finger and an amputation of the little fingertip, and they required surgery.
An employee was inspecting and photographing a trailer unit when his left index finger was pinched between a hardware bar and the floor, resulting in a partial amputation.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.