Other fall to lower level less than 6 feet · Fractures and dislocations
At a glance
Federal OSHA recorded a severe workplace injury
at Lockheed Martin Aeronautics Company, 86 SOUTH COBB DRIVE, MARIETTA, GEORGIA 30063
on — Fractures and dislocations, affecting the multiple body parts, n.e.c..
Final narrative
On March 16, 2022, an employee was using a pneumatic drill to drill holes in a metal fixture. The drilling location was about 6 feet from the floor, and he was using a 2-foot A-frame stepladder to reach it. He fell from the second step of the ladder to the floor about 2 feet below; suffered a dislocated shoulder and a broken pelvis; and was hospitalized, requiring surgery.
HospitalizedMultiple body parts, n.e.c.Step ladders
More severe injuries at Lockheed Martin Aeronautics Company
An employee was walking from one building to another when he slipped on wet concrete and fell. The employee was hospitalized with a fracture and dislocation of the right patella.
At 7:45 p.m., an employee was getting off a platform that was elevated less than 4 feet off the ground. His clothing caught on the platform, causing him to fall to the ground. The employee suffered a fractured left arm.
On November 16, 2021, an employee was standing on a work platform to clean out an equipment bay on the side of on an aircraft. The employee walked across the platform to retrieve equipment and stepped off an area of the platform that was unprotected due to a retracted slide out. His elbow struck the work platform, resulting in an elbow fracture that required surgery and hospitalization.
An employee was on the second level of an aircraft maintenance platform installing tags on equipment. The employee stepped on a hole cover and it gave way, allowing the employee to fall 9 feet to the concrete floor. The employee sustained head trauma, five fractured ribs, and a fractured L5 vertebra.
An employee was climbing a step ladder while carrying a 3-foot piece of conduit. As he went to reposition his feet on the ladder by pivoting, he slipped and fell from the third rung of a 6-foot ladder. The employee sustained fractures to the left femur, right elbow, and right ring finger.
An employee was descending a 4-step maintenance stand when she missed the bottom step and fell to the hangar floor. The employee suffered a left hip fracture.
An employee stopped a belt and was going to check it for missing packages. She fell backward 3-4 feet from an elevated platform and sustained a broken right arm.
An employee had just finished a routine concrete pour and was ascending the ladder to clean the concrete mixer truck. The employee lost their grip and fell approximately 2-3 feet, contacting the truck's bumper. The employee suffered rib fractures and a punctured lung.
An employee was performing duties as an expeditor. After opening the dock door, the employee scanned the barcode on the door of the truck and placed one foot on the truck and one foot on the dock. The truck drove out of the stall, causing the employee to fall 4 feet off the dock onto the concrete. The employee sustained fractures to the right side of the pelvis, elbow, and a left ring fingertip as well as injuries to the right wrist and bruising to the back and stomach.
More severe injuries in this industry (NAICS 336411)
A pressurized aircraft nose landing gear strut assembly was being disassembled. The gland nut dislodged under pressure and made contact with an employee's left hand, breaking it.
A metal tooling base was being moved by a forklift when the load shifted. An employee who was assisting went to stabilize the load and prevent it from sliding off the forks. The C-channel of the base crushed the employee's left hand against the concrete ground, resulting in the amputation of their third and fourth fingers.
An employee was working on a tool platform (47.5" tall) and was transitioning around to the other side when they lost balance and fell to the concrete floor. The employee was hospitalized with fractures to seven ribs and their elbow.
On August 19, 2025, at 6:30 a.m., an employee sat in the rear bench seat of a golf cart ahead of being driven to a parking lot. When the golf cart began to move, he fell off the cart and onto the ground, resulting in a fractured right hip.
An employee was helping to lift the grating from a floor draining system when the grating slipped and landed on his hand, resulting in the amputation of his right middle finger at the first joint.
During a workshop meeting in a hotel, an employee heard a drilling noise, so he walked outside to see what it was. An explosion occurred (possible gas line) and his face, ear, and hair were burned. He also fell and sustained a pelvic fracture.
An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.