Landoll Corporation

An employee had been moving scrap to a storage area in the fabrication department. While moving the hoist back to the work area, a hook at the end of the hoist got caught on a short rack (about 2 feet tall) of flat steel. The rack was pulled over and struck the employee, knocking him to the concrete floor. The rack then landed on the employee, fracturing both of his legs below the knees.

An employee was using a saw to cut square steel tubing. He pulled a cut tube toward himself to ensure it was cut. Another tube came through and crushed his left ring and little fingers against the side of the machine. Both fingers were medically amputated.

An employee was pulling parts to fulfill a customer order in the parts department. While utilizing a Work-Assist Vehicle (WAV) to pull two 89-lbs. axles, the remaining axles in inventory shifted. One axle rolled forward and struck the employee in the face. The employee sustained a fractured cheek bone.

An employee was moving a table (on rollers) that was loaded with square tubing into his work area. The square tubing shifted and a piece rolled and smashed right thumb.

An employee was in the process of loading a gang bar onto a paint rack in the shop using an overhead crane rigged with a magnet. The gang bar was placed on the rack out of position. The employee released the lifting device and attempted to reposition the gang bar without the lifting device. In the process of repositioning the gang bar, one end came out of the rack and fell pinching the employee's fingertip between the gang bar and the rack resulting in a right middle fingertip amputation.

An employee was fixing ceiling tiles while working from a ladder when they fell to the floor and sustained a hip fracture.

An employee was on an A-frame ladder retrieving materials from a shelf. He slipped and fell and his leg got caught in the ladder rungs, breaking his left tibia.

An employee was unloading materials from a flatbed trailer when they fell from the trailer and landed on the ground. The employee sustained a fractured left leg.

An employee was unloading appliances at a customer location for delivery. The employee was moving a water heater to be placed on the liftgate when he stepped backward and fell to the ground. The employee sustained rib and back injuries.

An employee was coming down a portable ladder when they slipped and fell to the ground, resulting in a right forearm fracture.

An employee was welding lift arms when their shirt caught fire due to welding sparks or heat, resulting in thermal burns to their upper chest.

An employee was climbing up a fixed ladder alongside a building to inspect a roof leak. The employee fell off the ladder and landed on the ground about 15 feet below. The employee was hospitalized with fractures to both wrists.

On September 16, 2025, an employee went to pull a weld stand when he tripped and fell, landing on the floor on his right hip. The employee suffered hip and fibula fractures that required hospitalization and surgery.

An employee was accessing a tensioned hook that required a hoist mechanism to be engaged. He was unhooking the lift hook from a shelf column when the "up" button was pressed, which released the tension on the pneumatic air hoist. The employee's right index finger was caught between the hook and the column, resulting in a soft tissue amputation and fracture to the fingertip.

A crane was lifting a pole out of a zinc bath in the galvanizing department when the chain attached to the pole broke. The pole fell back into the bath and liquid zinc splashed onto an employee, who suffered third-degree burns to an arm, the abdomen, the torso, the upper left side of the chest, an ear, the neck, and a hand.

An employee was stacking concrete blocks for a concrete bunker. As a block was swinging into place, the employee's left leg was pinched between two blocks, resulting in injuries to his left heel and lower leg.

An employee was climbing a ladder to inspect a vent in a restaurant dining area. The ladder slid out on the floor and the employee fell approximately 12 feet onto the ladder and the floor. He was hospitalized with a dislocated shoulder and a back injury.

An employee was rappelling down a tree. When he was most of the way down, he fell on the ground and suffered a broken pelvis.

An employee was filtering a fryer with a fryer filter machine. After going around the corner and then returning to the fryers, the employee stepped into the filter machine. The hot oil burned the employee's right ankle, and the employee was hospitalized.

An employee was cleaning out corn from a grain bin. The sweep auger in the bin was activated and caught his trouser leg. His leg was pulled into the auger, which injured his calf and caused leg fractures and lacerations.