Direct exposure to electricity, greater than 220 volts · Second degree electrical burns
At a glance
Federal OSHA recorded a severe workplace injury
at MasTec Utility Services, LLC, 2177 Goodlette Frank Rd, NAPLES, FLORIDA 34102
on — Second degree electrical burns, affecting the head and neck.
Final narrative
An employee was working aloft in a bucket truck, adjusting the rubber insulating blanket covering an energized mechanized jumper conductor. An arc flash occurred, causing second degree burns to the employee's face and neck.
HospitalizedHead and neckPower lines, transformers, convertors
More severe injuries at MasTec Utility Services, LLC
An employee was tightening a winch cable wire rope on the front of a truck when his right index finger was caught between the winch rollers and a rope swage collar. The employee sustained a fingertip amputation, approximately to the first knuckle.
An electrical crew was in the final stages of a hurricane restoration project. One of the employees was removing the protective coverup equipment when he noticed potential movement in a connection or energized cable. When he tightened the connection with a hand tool, a phase-to-ground arc flash burned his face. He was hospitalized.
Two employees were team-lifting a reel bar to insert it into a new reel of wire. As the employees were walking toward the reel of wire, the injured employee tripped on a concrete parking bumper and fell onto the curb. As he fell, he released his grip on the reel bar and it landed on his left hand. The left middle fingertip was amputated.
An employee was installing a ground wire to a power transmission pole. The ground wire contacted an energized portion of a cut-out, causing an arc-flash. The employee was hospitalized with second degree burns to their chest and arms.
An employee was connecting a utility transformer for underground service to a home. The employee's impact drill went across two connection bars with 240 volts of potential, creating an arc flash. The employee sustained burns to the face and eyes due to the arc flash and molten aluminum.
On December 15, 2023, at 9:15 AM, an employee was changing 60-amp fuses in a 480-volt panel when an arc flash occurred. The employee was hospitalized with burns to both hands.
An employee was troubleshooting the control setup for a variable air volume box above a ceiling. The employee's hand came into contact with an exposed, energized 277-volt wire that had loosened from its terminal on the box's assembly. He was shocked and fell off a ladder. His left hand passed across the ceiling grid and was lacerated. He also suffered an electrical burn to the right hand and was hospitalized.
An employee was moving a scissor lift through a doorway. The employee was pinned between the scissor lift and the doorframe, sustained a back injury, and was hospitalized.
An employee was standing on an A-frame ladder approximately 6 feet above the floor while he attached a suspended light fixture to the ceiling. The employee lost balance, and fell to the tiled floor below, sustaining blunt force trauma to his head.
An employee was inspecting the overhead area of a single-person lift and repositioning the lift through a double doorway. As they were transitioning through the doorway, they were caught between the doorframe and the vertical mast of the lift. The employee was hospitalized with injuries to the nose, left maxillary sinus, left orbital bone, and left jaw, with fractures at the maxillary sinus area.
The injured employee was performing routine maintenance on a fan belt/pulley. The injured employee and another person were moving the pulley back and forth manually to find a bearing issue. The injured employee's left ring finger got caught between the belt and the pulley wheel, resulting in a soft tissue amputation.
An employee was helping a coworker transport a tall palm tree with a mini skid steer. The employee was severely shocked by a high-voltage electrical wire above the ground.
An employee was retrieving a Christmas tree from a shelf using a ladder. He missed a step and fell to the concrete floor. He sustained injury to his head and wrist.
An employee was operating an agricultural tractor during sugarcane harvesting. The employee sustained a lumbar sprain due to vibration or motion from the tractor.
An employee was moving a 3-ton condensing unit, strapped down on a dolly, out of a garage. The strap broke, causing the employee to fall backward onto the brick pavered driveway. The employee suffered injury to a spinal ligament in the neck.