105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Interlake Mecalux, Inc.

Caught in running equipment or machinery, n.e.c. · Amputations

Federal OSHA recorded a severe workplace injury at Interlake Mecalux, Inc., 1600 N. 25th Ave., MELROSE PARK, ILLINOIS 60160 on — Amputations, affecting the finger(s), fingernail(s), unspecified.

An employee was observing a cataphoresis paint machine from a balcony when the machine caught their little finger and right index finger, resulting in partial amputations.

Hospitalized Amputation Finger(s), fingernail(s), unspecified Painting, priming, metal coating machinery

Interlake Mecalux, Inc.

On August 13, 2025, an employee was feeding wire through a junction box to feed a 120-volt circuit near a 480-volt bus duct. The bus duct suddenly combusted, and the employee suffered burns to his left hand and upper body. He was hospitalized.

Interlake Mecalux, Inc.

An employee was placing sheet metal into a roll forming machine when their finger was crushed under a clamp. The employee's left index finger was partially amputated.

Interlake Mecalux, Inc.

An employee collected a bundle from a tower on a forklift. The employee was moving away from the falling load, resulting in a fractured pelvis and left knee.

Interlake Mecalux, Inc.

An employee was re-installing a transmission on a roll-forming machine that processes steel coil into beams. The transmission weighed approximately 45 pounds. During the installation, the employee's right little finger got caught between the transmission and its housing. The employee suffered an amputation of approximately the first centimeter of his finger.

Interlake Mecalux, Inc.

An employee was loading a cart with finished steel frames for a pallet rack when they noticed a frame on the cart with a loose diagonal support. The employee raised the frame up to fix it when the frame fell and caught his left ring fingertip. The employee suffered a partial amputation.

View Interlake Mecalux, Inc.'s full OSHA safety record →

Scout Surface Solutions

Employees were assembling and testing a butterfly valve unit and actuator combo. When the unit was function tested with air, the valve gate closed on an employee's left thumb resulting in a fracture and laceration.

Gilster-Mary Lee Corporation

An employee was doing a daily inspection of the sifter screen on a mixer when the mixer line activated. The armature for the screen struck the employee's right wrist. Their wrist was cut and their hand was fractured.

Maxwell Paper Products Co

An employee was being trained on a machine when a roller came down on their hand, resulting in a fracture and laceration.

Turkey Hill LLC

An employee was doing a dry run during the setup of an ice cream machine. The machine indexed and the filler head amputated the employee's left middle finger above the last knuckle.

Erie Strayer Company

An employee was on a 3-foot ladder guiding cable onto a spool during installation on an overhead door. As the control box was jogged, the employee's hand was caught between the cable and spool, resulting in a wrist and hand fracture.

Interlake Mecalux, Inc.

On August 13, 2025, an employee was feeding wire through a junction box to feed a 120-volt circuit near a 480-volt bus duct. The bus duct suddenly combusted, and the employee suffered burns to his left hand and upper body. He was hospitalized.

New England Wire Products Inc.

An employee was operating a brake press and making the final bend on a steel part. Her right middle finger got caught between the part and the top punch as it bent the part upward. The employee sustained a crush injury resulting in amputation of the fingertip.

Madix, Inc.

An employee was feeding scrap metal into a chipper when his right hand was squeezed against a metal component of the machine. He suffered an amputation to the right index finger at the second joint.

OPTO INTERNATIONAL, INC.

An employee was setting up a press brake when the machine was activated and her left middle fingertip was caught between the dies and amputated.

THE CENTURY COMPANIES, INC.

On June 18, 2025, an employee working as a millwork installer was cutting shims using a circular saw. The saw hit a knot in the wood and jumped, cutting the palm of the employee's left hand and causing partial amputations to three fingers. The employee was hospitalized.

Takeda Pharmaceuticals U.S.A., Inc.

An employee fell while moving a water canister, resulting in fractures to four fingers on her right hand.

Great Dane Ltd. Partnership

An employee was changing a die in a press when the die slipped and crushed the employee's left index finger. The employee sustained an open facture of the tuft of the left distal phalanx and a partial amputation.

Olympia Food Industries Inc.

An employee was mixing sauce using a sauce barrel mixer when his left little finger was amputated.

AbbVie Inc.

An employee was driving a boom lift (in the lowered position) in an exterior dock area. The lift s left wheels rolled onto base plates that covered a 3-foot-deep sump pit. The base plates failed, and one side of the lift dropped. The employee's left leg was caught under the lift basket, and he suffered a fracture to the lower leg including the ankle.

TSA Processing - Montgomery

A temporary employee was carrying a nail gun through the warehouse when it hit his leg, activated, and fired a nail into the leg.