FLSmidth, Inc.

An employee was machining a trunnion using a grinding rig when their left hand was caught between the grinding stone and the trunnion, resulting in fractures to the middle, ring, and little fingers, as well as severe damage to the skin and amputations of the middle and ring fingers to the distal knuckle.

An employee was operating a hydraulic press when his left middle finger was crushed between the part he was pressing and the press table. The employee sustained an open fracture of the tuft of the distal phalanx, which led to a partial amputation of the left middle fingertip.

On May 6, 2020, at approximately 7:45 p.m., an employee stopped a lathe and pulled a nylon strap through the center of a 13-inch long, 8-inch diameter part. The nylon strap was attached to a jib crane, and the employee needed to jog the lathe to lock the chuck. The lathe did not jog and instead began running at operational speed. The employee's gloved right hand was caught between the nylon strap and rotating metal part, resulting in a broken thumb, severed nerves and tendons, and severe tissue damage to the hand.

An employee was lifting a metal plate with an overhead crane and a magnet. The plate or the magnet shifted and struck the employee's chin. The employee sustained a fracture and laceration to the chin and a concussion.

An employee was tossing a damaged toilet into a compactor. The toilet bounced off the compactor and lacerated the employee's right wrist, cutting an artery and tendon.

An employee was operating a hydraulic jack to bend a frame when the jack came loose and struck the employee. They were hospitalized for a spleen injury.

A truck had been towed into the shop with a flat tire and a blown airbag. An employee checked the tire for damage and was airing the tire. The employee was installing the valve core when the bead slipped off the rim. Air escaped, and the aluminum wheel struck the employee's head and face. The employee became unresponsive and was bleeding.

On December 14, 2023, at 8:40 p.m., three employees were inspecting milling machines for startup. A few of the sleeves on the mill drum needed to be changed out. The injured employee was trying to input a sleeve on the mill drum using a hammer. The hammer hit the edge of the drum, which caused a metal piece to splinter off and strike the employee's cheek just below the left eye. The metal splinter embedded in the back of their eye socket, resulting in pain, swelling, and bleeding that required hospitalization.

An employee was pushing a line of carts into a vestibule when the door cable snapped and struck his right ankle. The employee suffered a fracture that required surgery and hospitalization.

Three employees were engaged in horseplay when one employee suffered a laceration to the abdomen, caused by a pocket knife. The employee was hospitalized.

An employee was standing on a step ladder and operating a hydraulic jack. The jack began shifting, causing the ladder to tip to the left. The employee caught himself as he was stepping down from the third rung of the ladder. When he stepped to the floor, his left foot rolled and twisted under his body weight, resulting in fractures to his tibia and fibula above the ankle.

On August 1, 2024, an employee was working on a press and dumping scrap material from the center piece to a scrap barrel when their finger became caught in the hole of the center piece and was crushed between the center and the edge of the roller on the conveyor. The employee sustained an amputation of three-quarters of their finger.

An employee was removing grating to change metal chip hoppers located in a pit. The employee lost his balance and fell approximately 12 feet from the grate, landing in the metal chip hopper. The employee sustained a sprained right foot, a left foot fracture, and a fractured L5 vertebra.

An employee was exposed to carbon monoxide from a forklift and began to feel lightheaded. The employee was later was found unresponsive in the booth and was hospitalized.

An employee tripped over a concrete curb stop in a parking lot. The employee fell to the ground, landing on their left hip and breaking it.

An employee was conducting routine maintenance on a mixer. New lid pins had been installed, and the employee was rotating by hand to ensure they had been installed correctly. The employee's left middle finger was caught between the lid and top of a pin. The momentum from the mixer continued, causing a crushing injury to the finger. The employee underwent a medical amputation from the top knuckle to the tip of the finger.

An employee was climbing down a ladder when it slipped. The employee fell, suffering a broken scapula and broken ribs. The employee was hospitalized.

An employee was climbing down a 15-foot multipurpose ladder. The employee fell about 8 feet, landing on the concrete floor and the ladder itself. The employee suffered several injuries, all on the right side: broken ribs, a broken sternum, a broken temporal bone, broken shoulder, multiple fractures to the cheekbone, and a brain bleed.

An employee was rolling up the landing gear on his trailer when the handle began to unwind and struck his face, fracturing his jaw. The employee was hospitalized and required surgery.