Contact with hot objects or substances · Thermal burns degree unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at Ritchey Metals Company, Inc., 30 Georgetown Road, CANONSBURG, PENNSYLVANIA 15317
on — Thermal burns degree unspecified, affecting the Hand(s) and arm(s) n.e.c..
Watch Ritchey Metals Company, Inc. — freeGet an email when a new federal OSHA severe-injury report for Ritchey Metals Company, Inc. is published. One employer, no account, unsubscribe in one click.
Final narrative
Molten metal was being ladled out of a mold when it burned an employee's right forearm and hand.
Hospitalized Hand(s) and arm(s) n.e.c. Molten metal, slag
More severe injuries at Ritchey Metals Company, Inc.
An employee was regulating flow tap when molten metal splashed out of the trough and went between her jeans and her boots. The employee sustained burns.
An employee added flux to molten metal. As the employee tried to push the flux into the metal with a rake, the metal erupted and splashed the employee. The employee suffered burns to the left side of the face, the top and back of the head, the left arm, the back, and the right ankle.
An employee pulled out a bucket of hot oil from under the fryer. The employee then stood on the table to clean the back wall. He stepped down into the bucket of hot oil, resulting in third-degree burns to his left leg.
An employee was performing maintenance under a kettle. When he removed a tri-clamp on a transfer line, the hot fat and broth material in the kettle poured out onto his arm. The employee was hospitalized with burns.
After completing a run with an oil distributor truck, an employee was working to return (suction) the hot oil to the tank of the truck. When the employee opened one of the valves, hot oil (approximately 385 degrees) sprayed their face, resulting in first-, second-, and third-degree burns.
An employee was filtering a fryer with a fryer filter machine. After going around the corner and then returning to the fryers, the employee stepped into the filter machine. The hot oil burned the employee's right ankle, and the employee was hospitalized.
An employee was using a water hose to clean debris out of the outfeed of a log conditioning vat. Water began entering the vat from the adjoining vat through a void in the separation wall at the infeed of the vats. As the employee was exiting the vat he had been working in using the access opening at the outfeed, hot water exiting the access opening entered the top of his protective hip wader. It pooled at the bottom of the wader and burned his left foot and ankle.
More severe injuries in this industry (NAICS 331529)
An employee was unloading scrap from a metal bin. The bin slid out of the forklift and landed on the employee's right foot, causing fractures to the foot.
On August 12, 2025, an employee had just finished skimming slag from the top of a ladle of molten metal. They began to walk away while an overhead crane began moving the ladle. The latch that prevented the ladle from tipping came loose. The ladle tipped and spilled molten metal onto the floor and it burned both of the employee's feet.
On August 4, 2025, at 7:00 AM, an employee was approaching an area to put out a fire with an ABC fire extinguisher when an unknown material exploded and contacted their face. The employee sustained a laceration to the right cheek with an object penetrating the nasal cavity. The employee was hospitalized.
An employee was lifting a cope mold using a mold manipulator. While the mold was suspended in the air, he reached under it to retrieve the rollover pin. The mold slipped out of the manipulator and fell onto his right hand, causing a severe degloving of the right forearm and hand. He was hospitalized.
An employee had just put a dock plate in place. While stepping back over the plate, the employee tripped and fell onto it. The employee suffered a broken hip.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.