Stellantis US LLC

On May 21, 2024, at approximately 10:15 a.m., an employee was using a bandsaw to cut an 18 section of steel squares. The saw was equipped with hydraulic vises. As the employee was positioning the metal on the saw table, his right thumb struck against the saw blade and the tip was amputated. The saw blade was not running at the time of the incident.

On March 16, 2022, an employee was on a production line, taking a vehicle body on a carrier pallet, when the vehicle shifted. The employee attempted to straighten the vehicle body and his left little finger was caught between it and the carrier pallet. He suffered an amputation to the fingertip.

An employee fell while exiting a trailer. The employee landed on their left side on the pavement, suffering multiple broken ribs on the left side. The employee was hospitalized.

A driver was exiting his vehicle outside the plant gate when his foot slipped on the top step of the truck. He fell to the ground, landed on his left hip and elbow. The employee was hospitalized with a fractured hip/femur.

Two employees were removing a service lift platform from the back of a radar system. While handling the service lift platform, employee 2 was standing on the back of the radar and lost their footing, causing the service lift platform to shift and fall. The injured employee then fell from the top of the platform electronic subsystem (PES) to the floor, approximately 56 inches. The injured employee fractured his left elbow and left hip.

An employee fell from a loading dock to the ground 2-3 feet below. She suffered a compound fracture of the left hip and was hospitalized, requiring surgery.

An employee assisted in cleaning material from a conveyor pit. After the pit was cleaned, the employee proceeded to replace metal safety plates to ensure other employees did not fall into the pit. While replacing one of the last plates, the employee mis-stepped and fell approximately 5 feet into the pit. The employee was hospitalized with back/side bruising, elbow bruising, bone bruises, and/or fractured ribs.

An employee was walking on the top deck of a fire truck that was being assembled. The employee lost their balance and stepped on open, horizontally hinged doors, which could not support their weight. The employee fell 6 feet to the concrete floor and suffered fractures to their elbow and pelvis.

An employee was assessing an overhead stamping press door for alignment issues when the counterbalance moved and their left thumb was caught between the chain and the sprocket. The thumb was amputated. The door was locked out/tagged out at the time but gravitational pull was not controlled.

An employee was performing a bubble test (pressure test) on a pipeline to locate a leak when the joint elbow that was producing the leak detached and struck him. The employee sustained fractures to a rib and clavicle, as well as injuries to his spleen and lung.

An employee was installing a combat vehicle turbine engine to a dynamometer stand in a dynamometer test engine cell. While lining up the turbine engine to the stand, the employee's left arm was fractured between the engine and the face of the stand.

An employee was operating a forklift to retrieve a stack of empty containers from behind a weld cell. The forklift grabbed the stack. Then the forks tilted back, causing the top container to fall onto the forklift cage. The employee got off the forklift and went to pull the container down. The container fell on the employee's head and leg, resulting in a bump to the head and a fractured right leg.

An employee was working to deliver mail to an apartment building. She was waiting for a customer to move, to obtain clearance to the mailboxes. The door swung inward and closed on her right little finger. The top half of her finger was surgically amputated.

An employee fell from a step ladder while reaching for a tie-off point. He impacted the ground, and landed on his bolt bag which contained tools. The employee was hospitalized with fractured ribs, and a lacerated spleen and kidney.

On October 30, 2025, an employee was working to adjust a stackable metal shipping container. As the container dropped into place, it caught the employee's hands in an area between the upper and lower cross-members. The employee suffered a laceration to the left ring finger that required stitches, bruising to the right ring finger, and fractures to the right middle finger that necessitated medical amputation of the fingertip.

An employee was moving a scissor lift through a doorway. The employee was pinned between the scissor lift and the doorframe, sustained a back injury, and was hospitalized.

An employee was setting up communication equipment for a meeting. They were walking and tripped over a speaker on the ground. The employee sustained a leg injury.