Fire small-scale, limited · Thermal burns second degree
At a glance
Federal OSHA recorded a severe workplace injury
at Innovative Medical Management Solutions, LLC, 1775 Hooks St., CLERMONT, FLORIDA 34711
on — Thermal burns second degree, affecting the Multiple body parts n.e.c..
Final narrative
An employee was trying to extinguish a fire caused by a pot of melting butter/grease left on the stove. The butter boiled over and caught fire inside the pot. The employee placed a sheet pan on top while a fire extinguisher was obtained. When the sheet pan was removed, the employee was exposed to a flash of flame that contacted her neck, face, and left arm (upper arm and forearm), resulting in second-degree burns.
Hospitalized Multiple body parts n.e.c. Fats, oils, cooking greases
Two employees were working to clear land with other employees and prepping a brush pile (20 x 40 x 15 feet) to be burned. They planned to ignite the brush pile by creating a fire-line or trail with an accelerant so that the pile could be lit from a distance. After applying a gasoline-diesel mixture to the pile, one employee used a cigarette lighter to ignite the pile. Two employees suffered multiple first-degree burns to the face, ears, hands, chest, and abdomen.
An employee was hot patching a tire, which involves lighting a flammable liquid on fire to patch the tire. The flammable liquid contacted his arm, and he sustained burns to his arms and face.
An employee was transporting used filter media (containing pyrophoric iron sulfide) from an inlet gas separator in the bed of a truck. The material ignited. While the employee was removing items from the truck bed, a gas can was exposed to the fire and off-gassing vapors ignited. The employee suffered first- and second-degree burns to both arms, the chest, the neck, and the right ear. The employee was hospitalized.
An employee was using a cutting torch to heat up bolts that had seized up. The bolts caught on fire in a flash burn, and the employee suffered burns to the arms and elbows.
On August 2, 2025, at 4:59 PM, a contract painter was painting an aircraft using an electrostatic paint gun in the paint booth hangar. He was placing the gun into a container of methyl ethyl ketone to clean when the solvent ignited. The employee was hospitalized with third-degree burns to his arms and legs.
More severe injuries in this industry (NAICS 623110)
An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.
An employee tripped and fell while walking to a time clock. She suffered fractures to her left shoulder and right kneecap. She was hospitalized and required surgery.
An employee was walking down the hall in front of the therapy room when she tripped and fell, striking her right hip on the tile floor. The employee sustained a fractured hip and required surgery.
A nurse was heading to a carpeted hall from the tiled floor of the nurses station and tripped over the transition. She fell and landed on her knee. The employee was hospitalized with a fractured femur.
An employee was helping a coworker transport a tall palm tree with a mini skid steer. The employee was severely shocked by a high-voltage electrical wire above the ground.
An employee was retrieving a Christmas tree from a shelf using a ladder. He missed a step and fell to the concrete floor. He sustained injury to his head and wrist.
An employee was operating an agricultural tractor during sugarcane harvesting. The employee sustained a lumbar sprain due to vibration or motion from the tractor.
An employee was moving a 3-ton condensing unit, strapped down on a dolly, out of a garage. The strap broke, causing the employee to fall backward onto the brick pavered driveway. The employee suffered injury to a spinal ligament in the neck.