Overexertion while wielding, manipulating tools, object(s) · Sprains, strains, minor tears
At a glance
Federal OSHA recorded a severe workplace injury
at Pomp's Tire Service, Inc., 3131 Main Street, GREEN BAY, WISCONSIN 54311
on — Sprains, strains, minor tears, affecting the Knee(s).
Watch Pomp's Tire Service, Inc. — freeGet an email when a new federal OSHA severe-injury report for Pomp's Tire Service, Inc. is published. One employer, no account, unsubscribe in one click.
Final narrative
On 7/29/2024, an employee was utilizing a hand dolly cart to move a stack of automotive tires. When he used the foot pedal to start moving the cart, he felt a pain in his knee/leg area. The employee sustained a torn quadriceps tendon.
Hospitalized Knee(s) Utility carts, hand trucks, dollies
An employee was inflating a farm tire and wheel assembly in a commercial tire restraint cage. The assembly failed and the cage absorbed the energy from the release of compressed air from within the cage, and the cage contacted the employee's arm. The employee was hospitalized with a fractured arm.
An employee was branding a tire. A piece of rubber came away from the tire and remained on the branding iron. When the employee flung the burning piece of rubber onto the floor, it caught rags on the floor on fire and the employee suffered burns to the left lower leg.
An employee was working to refuel a truck. While handling the fuel hose(s), she experienced pain in her stomach. After completing the task, the employee drove back to the pad and the movement aggravated her abdominal pain. The employee was hospitalized with an abdominal sprain/strain.
An employee was in a weld cell working on the coolant pump attached to the weld machine. He was using pliers with his right hand to grip the coolant hose. While he was twisting from side to side to loosen the hose from the connection, his right shoulder and bicep were injured.
An employee was using a weed eater, moving it from side to side. He suffered a pinched nerve in the neck that caused numbness in the back and arms. He was hospitalized.
On March 27, 2025, a truck driver had pulled up to a riser to load fuel into their truck. The driver was pulling down on the loading arm at the fuel terminal, or lifting the fuel loading arm when they felt pain in their abdomen. The employee sustained a hernia.
An employee was using a Johnson bar to inch about 1,800 pounds of electrical equipment. The employee's right foot was on the wheel of the bar to keep it from slipping out of gear. The bar slipped, and the employee's momentum shifted from his right foot to his left. He suffered a broken left tibia and fibula.
More severe injuries in this industry (NAICS 423130)
An employee was rolling a rear tire for a tractor to a customer's building. The tire started to tip and the employee went to stop it by stepping into the middle of the tire. The edge of the tire struck his head and knocked him to the ground and the tire landed on his head. The employee was hospitalized with a fractured and dislocated left hip that required surgery and a scalp laceration.
An employee was pulling a metal skid off a stack to place the skid on the floor. The weight of the skid shifted and the edge caught the employee's right middle finger, resulting in a partial amputation.
An employee was operating an order picker in a warehouse. While backing down an aisle, the employee struck a 60-inch-by-60-inch pallet being lifted by another order picker. The employee suffered a tear to the cartilage surrounding their hip.
At about 1:25 p.m. on August 7, 2024, a temporary employee was operating a foam ring cutter when its pin broke, causing the head to fall and hit his left hand. He suffered a partial amputation to the ring finger, as well as a laceration and nail damage to the middle finger.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.