MARMADUKE, ARKANSAS—
Greenbrier Central, LLC
Struck by rolling, sliding, or shifting objects non-running · Amputations, avulsions, enucleations unspecified
At a glance
Federal OSHA recorded a severe workplace injury at Greenbrier Central, LLC, 7755 Highway 34 E, MARMADUKE, ARKANSAS 72443 on — Amputations, avulsions, enucleations unspecified, affecting the Other finger(s) n.e.c..
Final narrative
An employee was moving a rolling platform into position. As he approached the staging position, he placed his left hand on the outside of the platform's upright and his middle finger was crushed between the upright and a railcar, resulting in a partial amputation.
More severe injuries at Greenbrier Central, LLC
PARAGOULD, ARKANSAS—
Greenbrier Central, LLC
An employee was going down the stairs when they slipped on the metal grating and fell, fracturing their right ankle in two places.
PARAGOULD, ARKANSAS—
Greenbrier Central, LLC
An employee had been grinding and painting sheet metal for approximately 10 hours when they started to experience cramping. The employee was hospitalized with heat exhaustion.
PARAGOULD, ARKANSAS—
Greenbrier Central, LLC
An employee was operating a machine welder and was cleaning up flux when their glove was pulled into the auger, resulting in a laceration of the left middle finger.
PARAGOULD, ARKANSAS—
Greenbrier Central, LLC
An employee was standing near a pallet, handing a grinder to another employee. A nearby forklift struck the edge of the pallet that contained metal parts in boxes, causing a box to fall over and strike the employee. The employee was hospitalized for a right tibia fracture.
PARAGOULD, ARKANSAS—
Greenbrier Central, LLC
An employee was removing a brake beam wear liner on a railcar using a hydraulic C-clamp. The liner popped out of the clamp and impacted the employee's right little finger, resulting in a fingertip amputation.
View Greenbrier Central, LLC's full OSHA safety record →
Similar incidents · Same event type
CORSICANA, TEXAS—
Greenbrier Rail Services
An employee was using his left hand to push an axle down the line on a raised track work area while holding the remaining axle back with his right hand. A finger on his right hand was caught between the rail and the dust guard of the axle, resulting in a fracture and a laceration.
LAKE CITY, FLORIDA—
New Millennium Building Systems
An employee was moving metal out of a cart. He had removed one piece and was working to move another when the metal shifted. His right ring finger was crushed between the two pieces, and he suffered a partial amputation to the finger pad at the tip.
PITTSBURGH, PENNSYLVANIA—
Triad Metals International
A load of steel angles was being lowered when the lifting chain hit the load, causing it to slide toward an employee. An angle slid and pinched the employee, catching both of their legs between the beams and an angle. The employee suffered two fractured legs.
FORT WORTH, TEXAS—
Renegade Group LLC
Employees were replacing a 24" pig trap door. A strap was shackled on the pig trap door and connected to a forklift. Welders began to cut the door off. An employee was holding onto the door when the cut was finished. The door shifted and caught his fingers, resulting in a hand injury and amputation.
NORTH JACKSON, OHIO—
Universal Stainless & Alloy Products Inc.
An employee used a crane to set down a bar. The bar measured 9 inches by 16 feet. The strap got stuck under the bar, and the employee asked another employee to jog the roll. The bar rolled and pinched the injured employee's left hand, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 336510)
ERIE, PENNSYLVANIA—
Wabtec US Rail, Inc.
An employee was responding to a service request for a cable stripping machine that was making noise and not functioning consistently. While testing its function, the machine contacted the employee s right index fingertip, resulting in a fingertip amputation to the tuft.
LINCOLN, NEBRASKA—
Kawasaki Motors Manufacturing Corporation, U.S.A.
An employee was using a handheld cordless electric torque wrench. The tool's reaction arm came into contact with the employee's left hand, causing an amputation to the middle finger above the first knuckle.
PARAGOULD, ARKANSAS—
Greenbrier Central Paragould
On August 6, 2025, an employee was preparing to weld a metal sheet that goes between containers and weighs 800 pounds. The employee was placing a two-foot wooden brace (4 by 4) under the metal, which was being raised by a crane operator using a magnet. The magnet shifted and caused the load to catch the employee's right index fingertip against the wooden brace, resulting in a fingertip amputation.
HOCKLEY, TEXAS—
GBW Railcar Services, L.L.C.
An employee was climbing up a ladder to the top of a railcar. The employee slipped and fell from the ladder, striking the coupler of the railcar during the fall. This caused the employee's body to shift, and they landed on their head/nose/face. The employee suffered broken ribs, a broken cheekbone, a broken nose, and internal bleeding.
TEXARKANA, TEXAS—
Texana Tank Car
An employee was climbing up a fixed ladder on a tank car. The employee fell from the ladder to the ground, 8 to 10 feet below, and broke both ankles.
More severe injuries in ARKANSAS
BLYTHEVILLE, ARKANSAS—
NATIONAL MILL MAINTENANCE, LLC
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
TEXARKANA, ARKANSAS—
The Goodyear Tire & Rubber Company
On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.
OSCEOLA, ARKANSAS—
Big River Steel, LLC
An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.
PINE BLUFF, ARKANSAS—
American Tile & Marble Co., Inc
An employee was helping two other employees to push a pallet of tile on a loading dock. He suffered a broken fibula and was hospitalized.
SCRANTON, ARKANSAS—
Johnson Industrial Coatings, LLC.
On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.