Fall to lower level from collapsing structure or equipment more than 30 feet · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Hyland Filter Service Owensboro, Inc., 16105-B CHENAL PARKWAY, LITTLE ROCK, ARKANSAS 72223
on — Fractures , affecting the Multiple body parts n.e.c..
Watch Hyland Filter Service Owensboro, Inc. — freeGet an email when a new federal OSHA severe-injury report for Hyland Filter Service Owensboro, Inc. is published. One employer, no account, unsubscribe in one click.
Final narrative
On September 25, 2024, an employee climbed a ladder to replace filters at a grocery store. The ladder moved and the employee grabbed ahold of a light fixture and tried to stabilize the ladder. The employee lost their grip on the light fixture and fell approximately 40 feet to the floor. The employee was hospitalized with fractures to their left arm, pelvis, left femur, and right tibia.
Hospitalized Multiple body parts n.e.c. Portable ladders and stairs unspecified
An employee was installing metal panels on a roof when they fell through a skylight and landed on the ground 40 feet below. The employee sustained injuries to their head and ribs.
Employees were installing components of an elevator from inside the elevator and removed temporary hoisting equipment when the elevator descended from the fourth floor to the pit floor. One employee was hospitalized with fractures to their fibula and a rib, and the other employee was hospitalized with fractures to both feet.
An employee was descending after trimming up in a tree when the limb that his climb line was attached to failed after he descended 7 feet. The employee fell approximately 30 feet to the ground. The employee sustained three fractured vertebrae and a fractured sternum.
An employee was working 32 feet above the ground in a scissor lift, attaching a camera to a gantry crane. The crane moved and struck the scissor lift, which tipped and fell to the ground. The employee was hospitalized with fractures to his collarbone, humerus, and pelvis. Fall protection was worn at the time.
An employee was descending the side of a scaffold when a rail detached from the scaffold and the employee fell 38 feet to the concrete ground. The employee sustained a fractured pelvis, fractured lumbar vertebra(e), and lacerations.
More severe injuries in this industry (NAICS 238220)
An employee was moving a 3-ton condensing unit, strapped down on a dolly, out of a garage. The strap broke, causing the employee to fall backward onto the brick pavered driveway. The employee suffered injury to a spinal ligament in the neck.
An employee was closing the side cargo door to a company van. The tip of his finger got caught between the door and the door jamb, resulting in a partial amputation.
While working at a customer's residence, an employee was cutting tape with a box cutter to wrap insulation for a piece of pipe. The box cutter struck a hardened object within the wall causing it to bounce back and puncture the employee's right eye. The employee was hospitalized.
An employee was assembling a baker type scaffold. He was beginning to transverse down the scaffold, approximately six feet off the ground, when the scaffold tipped over and he fell. The employee was hospitalized with a fractured femur.
An employee was trimming out sprinklers on the exterior of a building when he fell off an extension ladder. He landed on the ground and sustained fractures to his nose and arm.
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.
An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.
On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.