Caught, entangled in running powered equipment normal operation · Amputations involving bone loss
At a glance
Federal OSHA recorded a severe workplace injury
at Boise Cascade, 4318 Pioneer Rd, HOMEDALE, IDAHO 83628
on — Amputations involving bone loss, affecting the Other finger(s) n.e.c..
Final narrative
An employee was changing over from running 3 1/8 to 5 1/8 beams at the sander on the finish line and placed a 2x6 board under the sander side head. The machine grabbed the board, pulling their left hand into the sander side head and causing a severe laceration on the left index finger and thumb. The index finger was amputated.
Amputation Other finger(s) n.e.c. Boring, reaming, routing, notching machinery
An employee was removing veneer from a composer machine using a pipe pole. The employee made contact with the blade in the machine, which partially amputated the employee's left thumb. The employee was hospitalized.
An employee was attempting to clean the focus eye lens in a trough that wood passes through on the lay-up assembly line. The machine started while the employee's right ring finger was in the strike area and a piece of wood crushed the finger, breaking it and causing the fingertip to burst.
An employee was attempting to dislodge a piece of veneer that was caught in a machine when her glove was pulled into the drive gears in the lower in-feed belt. Her right index finger was pinched and smashed by the drive gears. The machine was running and guarded at the time of the incident.
An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.
An employee was working on a production line. The employee went to retrieve parts that came out of the parts holder, and their left hand became caught between a chain and a sprocket. Three fingers on the hand were amputated.
An employee was hooking up bundled tie-downs with a chain. While he was holding a hook, the other hook was unlocked. This caused the employee's hook to slide down and pinch his right index finger between the chain and the shackle. He suffered an amputation to the fingertip (without bone loss), as well as an open fracture.
An employee was operating a pad printer. The employee's finger was caught in the printer and they suffered a fingertip amputation. The part of the printer that caught the employee's finger was unguarded at the time.
More severe injuries in this industry (NAICS 321999)
An employee was using a telehandler to move pallets of pellets from a pod. The employee exited the telehandler to pick up a sacrificial pallet that is placed under the bottom layer of pallets. When the employee turned to pull the pallet away, the top two tiers of the pod fell on him. The employee sustained a fractured ankle, three fractured ribs, and fractured vertebrae.
An employee was preparing to replace a belt on a fan drive assembly. He went to manually stop the fan and was caught by the belt. His hand was pulled into the machine and his left little fingertip was amputated.
An employee was cutting remanufactured lumber with a chainsaw when a board fell and struck his left hand, causing his left hand to move off the chainsaw. While he was moving his hand back, the chainsaw kicked back and lacerated the top of his left hand. The employee was hospitalized.
An employee was diagnosing the lack of flow of product to a powder bin. The employee removed the rotary star valve below the bin. While he was reinstalling the valve, his right middle finger was crushed between its shaft and its housing. The finger was partially amputated.
An employee was standing on a multi-purpose ladder installing head flashing over a window. Their feet were approximately 6 feet off the ground and three rungs from the top. The employee lost their grip on the drill they were using and the ladder tipped over. The employee fell from the ladder to the ground, resulting in a fractured left wrist, bruised chest, and lacerations to their face and lip.
An employee was inspecting the overhead area of a single-person lift and repositioning the lift through a double doorway. As they were transitioning through the doorway, they were caught between the doorframe and the vertical mast of the lift. The employee was hospitalized with injuries to the nose, left maxillary sinus, left orbital bone, and left jaw, with fractures at the maxillary sinus area.
An employee was loading a 4-inch wooden door into a pickup truck when he felt a pop in his right side behind his shoulder blade. He was hospitalized later that day and underwent surgery, having suffered a collapsed right lung.