105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Blattner Energy, LLC

Contact incidents unspecified · Concussions

Federal OSHA recorded a severe workplace injury at Blattner Energy, LLC, 1078 - Flat Ridge IV & V Wind - 3346 SE 180th Street, HARPER, KANSAS 67058 on — Concussions, affecting the Brain.

An employee was climbing a ladder and guiding a cable through openings and hatches in a tower. The employee was caught on the cable and pulled into the bottom edge of a deck/hatch opening, suffering a head injury and a concussion.

Hospitalized Brain Source, secondary source unspecified

Blattner Energy, LLC

An employee was painting in the middle section of a tower when she fell 70 feet through the hatch. The employee was hospitalized with arm fractures.

Blattner Energy, LLC

Two employees were working from inside a man basket attached to a forklift. While attaching the tail rigging to one of the turbine blades, the man basket attached to the forklift failed, causing the employees to fall approximately 20 feet to the ground. One employee sustained fractures to their left foot and right femur and shin, as well as dislocations to their right knee and left shoulder. The other employee was not injured.

Blattner Energy, LLC

An employee was testing pile depth and installing L-brackets. He tripped and fell headfirst into a piling (a metal I-beam driven into the ground to support solar panels) while carrying a 60-pound magnetic drill. He was wearing a hardhat and sustained back pain and hip pain.

Blattner Energy, LLC

An employee was picking up trash when they experienced heat-related syncope. The employee was hospitalized.

Blattner Energy, LLC

An employee plugged in panel strings from the big lead assembly (BLA) and received a shock, resulting in burns to their hands.

View Blattner Energy, LLC's full OSHA safety record →

HB Fleming, Inc.

A crew was installing drilled micropiles alongside an outdoor covered deck foundation. The injured employee was working the front of the drill when a loose section of casing dropped onto the tip of a rig wrench and pulled the wrench down to an embedded casing. The employee's left little finger was caught between the rig wrench and the embedded casing and was amputated above the top knuckle.

Howard Industries Inc.

An employee was checking a pole-type transformer tank for leaks. A hydraulic clamping device was lowered onto his right thumb and crushed it against the sharp edge of the bottom of the tank. He suffered a partial transphalangeal amputation to the thumb.

3S Services, LLC

An employee had been cleaning the work area. While lifting a saw, the employee's index finger was lacerated by the saw blade. A tendon was cut and required surgery.

Broad & James, Inc.

An employee was installing a hydraulic extension cylinder in a tow truck when their leg was caught between the cylinder and the truck frame. The employee was hospitalized with a broken tibia, which required surgery.

TRC Services of Texas INC

An employee was sorting sucker rods. His right hand was caught in the area where the rod hits up against the frame and his index fingertip was amputated just below the nail.

Kasparian Underground LLC

An employee was terminating cables in a junction box. A loose ground wire came into contact with the bushing, causing a flash that burned the right side of the employee's face and his right hand.

Viking Utility Construction

An employee was using a bucket truck hoist to raise secondary aerial wiring. The wire made contact with the primary wire, causing an arc flash. The employee suffered burns to both hands and was hospitalized.

Henkels & Mc Coy

An employee was working to move a telephone pole when the pole rolled, causing injury to their hip.

Standard Utility Construction, Inc.

An employee was terminating conductors to buss bars inside the secondary compartment of a single-phase transformer. An arc flash occurred, causing burns to the soft tissue of the employee's face.

Michels Power, Inc.

An employee was securing the claw of a grapple truck to the truck bed. His left little finger was caught between the tie down strap and the rub rail of the truck, resulting in partial amputation of the finger.

Omya Inc.

An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.

John Deere Coffeyville Works

An employee was moving a rack onto a lower conveyor in the south heat treat area when their finger got caught between the part tray and the rollers, resulting in a fingertip fracture and amputation.

Haven Steel Products Inc

An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.

Vestas-American Wind Tech

Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.

Alliance Ag and Grain LLC

An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.