105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Tri-Lakes Services Inc

Non-passenger struck by rail vehicle · Fractures

Federal OSHA recorded a severe workplace injury at Tri-Lakes Services Inc, 890 IP Lane, VALLIANT, OKLAHOMA 74764 on — Fractures , affecting the Hand(s) and arm(s) n.e.c..

An employee was working to couple two railcars together, holding the lever with one hand and the coupler with the other hand. The locomotive then backed up and his left arm got caught in the coupler, resulting in a broken arm and a broken little finger.

Hospitalized Hand(s) and arm(s) n.e.c. Rail vehicle unspecified

Borealis Compounds, Inc.

Two employees were moving a railcar (plastic pellet hopper car) using a mobile railcar mover. One employee was the engineer in control of the railcar mover and the injured employee was a switchman. The railcar mover went forward and the hopper railcar struck the injured employee, resulting in a severe crushing injury to the employee's right arm.

DUNN ROADBUILDERS

An employee was working the switchboard for a train to move through the plant. He gave the all clear signal, and the train began reversing on the tracks. The employee went to get onto the train as it was moving toward him when he missed the railing and fell underneath the train. The last railcar ran over both of his legs, amputating the legs above the knees.

Archer Daniels Midland Company

On April 27, 2025, employees were performing a railcar switch. When the train began to shift back, the injured employee's right arm got crushed between the knuckles of two railcars. The employee was hospitalized with fractures to their forearm.

Azcon Metals, Inc.

An employee was uncoupling railcars while the cars were in motion and a car ran over her left lower leg, resulting in crush injuries and amputation below the knee. The employee was hospitalized.

Total Grain Marketing, LLC

On October 5, 2024, a crew was staging the last string of railcars to be loaded when the injured employee stepped forward and tripped on a railroad tie, causing his right foot to be on the rail. A staged railcar rolled forward and caught his foot between the wheel and the rail. The employee was hospitalized for amputations to toes.

NATIONAL MILL MAINTENANCE, LLC

An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.

Elkhorn Mechanical and Combustion

An employee was climbing a ladder to inspect a vent in a restaurant dining area. The ladder slid out on the floor and the employee fell approximately 12 feet onto the ladder and the floor. He was hospitalized with a dislocated shoulder and a back injury.

Crown Lift Trucks

An employee was operating a lift truck when it struck a stationary lift truck. His left thumb was pinched between the two lift trucks, resulting in a partial amputation.

Spellman High Voltage Electronics Corporation - Valhalla

An employee was disassembling a pressurized unit using a driver drill. When the unit was disassembled, it caused a kickback from the tube head, causing the drill to strike the employee's left forearm. They sustained a diaphyseal fracture to their left radius and ulna, which required surgery.

Ring Power Corporation

After repairing a piece of industrial equipment, an employee had brake-cleaning liquid on his gloves. A lighter ignited the liquid, and the employee's hands were severely burned.

Rae Corporation

An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.

Meeco Sullivan

An employee was cutting a piece of metal rod with a metal cutting machine. His right middle finger became caught between the rod and the machine's table. The employee's fingertip was partially amputated.

Edward Jones Investments

An employee was working at her desk. She went to stand up and fell to the floor beside the desk. The employee sustained a hip displacement and required surgery.

Burgess Manufacturing of Oklahoma Inc.

An employee was processing wood boards at a chop saw when the saw malfunctioned and the blade cut her left hand and fingers. She was hospitalized and her little finger was surgically amputated.