Non-passenger struck by rail vehicle · Amputations involving bone loss
At a glance
Federal OSHA recorded a severe workplace injury
at DUNN ROADBUILDERS, 509 Avenue D, LAUREL, MISSISSIPPI 39440
on — Amputations involving bone loss, affecting the Thigh(s).
Final narrative
An employee was working the switchboard for a train to move through the plant. He gave the all clear signal, and the train began reversing on the tracks. The employee went to get onto the train as it was moving toward him when he missed the railing and fell underneath the train. The last railcar ran over both of his legs, amputating the legs above the knees.
Two employees were working in a designated paving area. The first employee was operating an asphalt paver while a second employee was walking to the left of the paver, examining the paving, when a publicly owned vehicle veered into the designated paving area and struck the two employees. The first employee suffered fractures to the left leg, while the second employee suffered multiple fractures to the body.
Two employees were moving a railcar (plastic pellet hopper car) using a mobile railcar mover. One employee was the engineer in control of the railcar mover and the injured employee was a switchman. The railcar mover went forward and the hopper railcar struck the injured employee, resulting in a severe crushing injury to the employee's right arm.
On April 27, 2025, employees were performing a railcar switch. When the train began to shift back, the injured employee's right arm got crushed between the knuckles of two railcars. The employee was hospitalized with fractures to their forearm.
An employee was working to couple two railcars together, holding the lever with one hand and the coupler with the other hand. The locomotive then backed up and his left arm got caught in the coupler, resulting in a broken arm and a broken little finger.
An employee was uncoupling railcars while the cars were in motion and a car ran over her left lower leg, resulting in crush injuries and amputation below the knee. The employee was hospitalized.
On October 5, 2024, a crew was staging the last string of railcars to be loaded when the injured employee stepped forward and tripped on a railroad tie, causing his right foot to be on the rail. A staged railcar rolled forward and caught his foot between the wheel and the rail. The employee was hospitalized for amputations to toes.
More severe injuries in this industry (NAICS 237310)
An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.
An employee was cleaning out an inlet pipe in a stormwater structure. The employee stepped back, fell into the pipe, and landed on concrete 13 feet below, at the bottom of the structure. He suffered a broken back.
A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.
An employee was operating a roller and paving a small pathway next to a pavilion. The ground was on a slight pitch, causing him to reach up toward the roll cage to stabilize himself. His right fifth finger was pinched between the roll cage and the rafter of the pavilion. The employee sustained a partial degloving injury with partial traumatic amputation.
An employee was working with paving equipment and heard a noise on the opposite side of the machine he was working on. When the machine stopped, the employee went to the opposite side and crouched down to investigate the noise. A mini track loader backed up and drove over the employee's leg. The employee sustained fractures to their lower leg, ankle, and foot.
An employee was checking a pole-type transformer tank for leaks. A hydraulic clamping device was lowered onto his right thumb and crushed it against the sharp edge of the bottom of the tank. He suffered a partial transphalangeal amputation to the thumb.
The injured employee was standing behind a table. She jumped out to scare another employee, but tripped and fell on the tile floor, injuring her right ankle/foot. She was hospitalized with a dislocated ankle that required surgery.
An employee was going into a trailer to mark product for shipment and the trailer pulled away from the dock. The employee fell out of the trailer, contacted the dock plate, and then fell to the ground. The employee was hospitalized with a punctured lung, fractured ribs, and contusions.
An employee was hooking up bundled tie-downs with a chain. While he was holding a hook, the other hook was unlocked. This caused the employee's hook to slide down and pinch his right index finger between the chain and the shackle. He suffered an amputation to the fingertip (without bone loss), as well as an open fracture.
An employee was operating a gas tugger to lift metal sheeting. His left hand was pulled into the pulley, which crushed his left thumb, resulting in avulsions and other tissue damage. He was hospitalized and required surgery.