105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Motion Industries, Inc.

Struck by running powered equipment unspecified · Amputations, avulsions, enucleations unspecified

Federal OSHA recorded a severe workplace injury at Motion Industries, Inc., 46 Warwick Industrial Drive, WARWICK, RHODE ISLAND 02886 on — Amputations, avulsions, enucleations unspecified, affecting the Finger or thumb tip(s), nail(s).

An employee was wrapping a belt on a machine when his left middle finger was caught between the middle roll core and the slitter cylinder, and the fingertip was amputated.

Amputation Finger or thumb tip(s), nail(s) Machinery unspecified

Motion Industries, Inc.

An employee was using a compressed air blower to clean up accumulated dust and was exposed to airborne contaminants at the facility. The employee experienced shortness of breath and was hospitalized.

Motion Industries, Inc.

At 9:40 a.m. on January 13, 2021, an employee was going up a tube between the beltcore. While he was doing so, a square tube slipped out. His left middle finger was pinned between the beltcore and the square tube. The finger was amputated and he was hospitalized.

Motion Industries, Inc.

An employee was struck by a rolling 600-pound cylinder, suffering a broken hand and ankle.

Motion Industries, Inc.

An employee was transporting a box placed on the seat beside him on the forklift. The box fell while the forklift was in motion. The employee reached down to retrieve it and lost control of the forklift while going down a ramp. When the employee tried to regain control, he was ejected from the forklift and injured his hip.

Motion Industries, Inc.

An employee tripped and fell on shrink wrap on a pallet, fracturing the left femur.

View Motion Industries, Inc.'s full OSHA safety record →

Inteplast Group

An employee was removing plastic material from a production line when the machine cycled and amputated his left index, ring, and little fingers.

TABER EXTRUSIONS, LLC

An employee's left arm was caught in the fingers or jaws of the head stretcher machine, resulting in a laceration. The employee was hospitalized.

American Flowform and Machining, LLC

Two employees were setting up a mandrel in the spindle of a machine. The mandrel was side-shifted while an employee's hand was on the mast of a powered industrial truck. The employee suffered crushing injuries that resulted in amputations to the middle and ring fingertips.

Omya Inc.

An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.

TRC Services of Texas INC

An employee was sorting sucker rods. His right hand was caught in the area where the rod hits up against the frame and his index fingertip was amputated just below the nail.

Onpoint Industrial Services Hiring Center

An employee was using a powered miter saw to cut 2x4's. The saw blade hit something inside a board (possibly a hidden nail) and jumped, causing a laceration to the employee's left forearm. The employee was hospitalized with soft tissue and tendon injuries that required surgery.

S&R Compression, LLC

A crane had been used to set a steel plate on a steel frame. An employee was trying to remove a clamp from the plate when the plate fell and crushed the tip of his left little finger. The employee sustained a fingertip amputation.

Morgan Engineering Systems, Inc

An employee was operating a scissor lift, raised to a height of about 15 feet, to inspect an overhead crane rail. The crane itself was being moved. Its hook swung into the scissor lift s arms, causing the lift to tip over onto its side, which in turn caused the lift and the employee to fall to the floor. The employee suffered injuries including broken ribs, spinal fractures, scapula fractures, and internal injuries.

Fairbanks Morse, LLC

A technician was operating a crane hoist to lift/remove a cylinder head from the main engine (port). The load was lifted at an angle, causing the cylinder head to get stuck on the cylinder head studs. When it became free from the studs, the cylinder head swung. It struck the technician and caught them against the cabinet door. This resulted in an amputation of their left index fingertip at the distal knuckle.

Gateway Healthcare, Inc.

An employee was talking to a child on the playground, when the child grabbed her hand to lead her away. The employee stepped, lost her balance, and fell over. The employee was hospitalized with a fracture of her lower left leg and required surgery.

Electric Boat Corporation

An employee was struck by a plasma cutter and suffered a broken left tibia and fibula. The employee was hospitalized.

O'REILLY AUTOMOTIVE STORES, INC.

An employee tripped on a rotor on the floor of a store, fell, and suffered a broken right thumb.

Johnson & Wales University

An employee was walking through a parking garage. She tripped over a curb and fell forward onto her right knee, then her left knee, both hands, and her face. She suffered an injury to the left knee that required surgery, as well as scrapes on the chin and both palms and soreness in the left wrist.

Brown University

An employee was using a hose to clear storm drains after a sewer backup. The employee fell backward and his head struck the curb, resulting in an Injury on the right side of his head, generalized bruising, and pain in his left ankle, right hip, left shoulder, and neck. The employee was hospitalized.