Contact with objects and equipment, n.e.c. · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at BAE Systems, Charleston Army Strategic Logistic Activity Center, GOOSE CREEK, SOUTH CAROLINA 29445
on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
While climbing down a military vehicle (MMPV) access ladder, the employee's wedding ring on his left hand got caught on one of the anti-slip barbs on the step. When he dismounted the last step, the flesh was pulled from his ring finger, resulting in its ultimate amputation.
An employee was walking when his foot caught residual adhesive from floor tape and he tripped and fell to the concrete floor, resulting in a fractured right hip.
An employee was using a powered pallet jack to move a fixture. His leg became caught between the pallet jack and the fixture and he fell on the same level, resulting in a fractured left fibula.
The injured employee was trying to hold a door open for another employee when the automatic door closed on the injured employee's left ring finger. The employee's fingertip was amputated halfway down the fingernail.
An employee was inside a mid-level ballast tank onboard an amphibious transport dock (naval vessel). He was walking across the deck and stepped onto a board that was covering an open hole. The board split and the employee fell about 15 feet to the bottom of the tank. He sustained internal bleeding, a brain hematoma, and fractured the C6 and L1 vertebrae.
While adjusting the rigging for the bull gear installation, the bull gear became unstable and shifted. The shifting gear contacted the mobile platform on which the employee was standing knocking the platform over and causing the employee to fall to the ground. When the gear shifted, the employee's right index finger was caught between the rigging and the wood block resulting in amputation of the finger.
An employee was preparing the serving line area for the evening meal. He was cleaning a stainless steel table when his left middle finger got stuck in a gap where a raised ledge is affixed to the table. As he pulled his finger from the space, his fingertip was amputated.
An employee was unloading goods from a pallet and putting them onto metal shelves when their wedding ring got caught on a shelf and their finger was amputated.
An employee was in the back of a dump truck emptying a bag from a mower. When he placed his hand on the side of the truck and as he came down from the truck, his ring became caught. The employee sustained an amputation to his ring finger.
On May 18, 2023, a maintenance employee was descending a fixed ladder when his ring was caught on a ladder rung. The employee sustained a fracture to the left ring finger that required surgery.
An employee was unloading a pipe from a fitted rack on his truck. As the employee grabbed a pipe strap, his glove became caught. The employee then went to step off the back of the truck and the top inch of his left hand ring finger was partially amputated.
More severe injuries in this industry (NAICS 811111)
An employee was repairing the suspension of a semi-trailer. He was installing an air bag to the suspension when his left ring finger was crushed between the air bag and the suspension mounting beam. The employee was hospitalized.
A mechanic had just finished a repair on a straight truck with a flatbed , which had been lifted using a bottle jack. As the employee was about to remove the jack, it failed. The truck shifted forward, dropped down, and struck the employee's chest. He suffered broken ribs and a broken shoulder.
An employee was performing diagnostic work on a vehicle engine. As the employee was leaning over the front of the vehicle, the engine was activated. A fuel leak had produced fumes around the engine, and the ignition spark ignited them. The employee suffered second-degree burns to both hands, both biceps, and the upper chest area.
An employee was hot patching a tire, which involves lighting a flammable liquid on fire to patch the tire. The flammable liquid contacted his arm, and he sustained burns to his arms and face.
An employee delivered a package. On her way back to her vehicle she was attacked by two dogs that came from around a corner. She was hospitalized with dog bites.
The injured employee was standing by the controls for the electric spud system on the barge, preparing to raise the spuds. Meanwhile, an excavator was moving a mat on the deck. As the excavator swung from port to starboard, it's counterweight struck the injured employee s shoulder, causing them to lose balance and fall against the spud controls. The employee sustained bruises and contusions to their right shoulder and chest.
A technician was operating a crane hoist to lift/remove a cylinder head from the main engine (port). The load was lifted at an angle, causing the cylinder head to get stuck on the cylinder head studs. When it became free from the studs, the cylinder head swung. It struck the technician and caught them against the cabinet door. This resulted in an amputation of their left index fingertip at the distal knuckle.
An employee was securing a power cord to a refrigerated truck container. A truck started backing up to connect with the container and the employee was pinned between the tires of the container and the bolster of the truck, resulting in a fractured leg.