Ignition of clothing from controlled heat source · Heat (thermal) burns, unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at Terrywille Park Authority, 70 Southern Blvd, DANBURY, CONNECTICUT 06810
on — Heat (thermal) burns, unspecified, affecting the leg(s), unspecified.
Final narrative
An employee had just spilled gasoline on himself while fueling a chainsaw. A coworker was smoking nearby and caused the injured employee's pants to catch on fire. The employee was burned and required hospitalization.
An employee was welding metal parts. The employee turned to the left and their work uniform came in contact with the location on the part that had just been welded. The employee's uniform ignited, causing burns to their shoulder and back.
An employee was welding steel dump ramp slides. He leaned over and a previous weld caught his hoodie on fire. The employee sustained burns on his left side from the armpit to the waistline.
An employee was using a fiber wheel to cut a 55-gallon drum to make a trash can. As they were cutting, sparks flew into the barrel and fire came out of a hole on the barrel, catching the employee's shirt on fire. The employee sustained burns to their abdomen and chest, requiring hospitalization.
An employee was removing tubing caps and cleaning tubing ends with solvent. Their flame-resistant pants became soaked with the cleaning solvent and were ignited by a propane torch used for removing tubing caps. The employee was hospitalized with burns to their legs.
More severe injuries in this industry (NAICS 712190)
After completing a fitness test, an employee experienced lower leg pain and an inability to walk. The employee was hospitalized for compartment syndrome in both legs.
An employee was cutting up a large tree that had blown down on a rocky ledge on a hill. He began cutting on the uphill side of the tree, but due to obstructions he had to move to the downhill side. The tree separated from its 7-foot root ball, which started sliding toward him. While attempting to get out of the way, he tripped and fell to the ground, striking his head on an unknown object. As the root ball continued to move toward the employee, he made it below the level of the rock ledge. The root ball rolled over when it reached the ledge and pinned the employee's lower leg, and broke his fibula. He also suffered scrapes and bruises from the fall.
An employee was walking on a trail in a national park and stepped onto an angled and flat slab of granite when her ankle rolled and her weight shifted, but she did not fall. She was hospitalized with a fractured tibia and fibula and a dislocated ankle.
An employee was offroad, looking for a lost hiker. The employee fell off a canyon rim edge and landed on rimrock 5 or 6 feet below, suffering a separated shoulder and a head injury that required stitches. The employee was hospitalized.
An employee was preparing to conduct maintenance on a riding lawn mower and lifted the mower deck upward to its vertical position with assistance from another employee. A third employee pulled a locking pin, causing the front wheel mount to move forward into the cab. The cab entrance hand hold crushed the little fingers on the injured employee's hands. The employee was hospitalized and required surgical amputation of the right little finger to the second joint, as well as debriding and stitches to the left little finger.
An employee was checking on a machine outside of the building and removed a cover to clean out a blocked area. His hand was caught by a rotary valve in a dust collection machine. The employee's fingertip was amputated.
An employee was working to clean a glue roller with a scraper tool. The tool and the employee's left thumb were pinched between two rollers, resulting in a partial amputation.
An employee was re-arranging boxes of pipe insulation on a pallet. One of the boxes fell from the pallet and knocked over an upright empty cylinder. The cylinder fell and crushed the tip of the employee's right toe. The employee's toe required surgical amputation.
An employee was securing the claw of a grapple truck to the truck bed. His left little finger was caught between the tie down strap and the rub rail of the truck, resulting in partial amputation of the finger.
An employee was cutting extruded aluminum framing material using a horizontal band saw. She went to grab a rag in the machine when the rag contacted the blade and pulled her hand in toward the blade, resulting in a partial amputation of the right index finger.