105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Alcoa Inc.

Ignition of clothing from controlled heat source · Second degree heat (thermal) burns

Federal OSHA recorded a severe workplace injury at Alcoa Inc., 1480 Manheim Pike , LANCASTER, PENNSYLVANIA 17601 on — Second degree heat (thermal) burns, affecting the multiple trunk locations.

Watch Alcoa Inc. — free Get an email when a new federal OSHA severe-injury report for Alcoa Inc. is published. One employer, no account, unsubscribe in one click.

On or about January 26, 2016, at 2:45 a.m., an employee was practicing cutting a 3/4-inch steel plate on a cutting table with an oxygen propane torch when his 100-percent cotton work shirt caught on fire, causing second degree burns over 12 percent of his chest and stomach. He was hospitalized.

Hospitalized Multiple trunk locations Blouses, shirts, dresses, trousers, skirts

Alcoa Inc.

An employee was walking next to the location where a carbon anode got stuck on the end of a conveyor. The anode dislodged and fell onto the passing employee's right foot fracturing it.

View Alcoa Inc.'s full OSHA safety record →

Falls Manufacturing Company/a U-Haul Co.

An employee was welding metal parts. The employee turned to the left and their work uniform came in contact with the location on the part that had just been welded. The employee's uniform ignited, causing burns to their shoulder and back.

Flint Ag & Turf

An employee was using a small propane heater when they sustained third-degree burns to the left buttock and second-degree burns to the back and neck.

Novae, LLC.

An employee was welding steel dump ramp slides. He leaned over and a previous weld caught his hoodie on fire. The employee sustained burns on his left side from the armpit to the waistline.

Pik Rite Inc.

An employee was using a fiber wheel to cut a 55-gallon drum to make a trash can. As they were cutting, sparks flew into the barrel and fire came out of a hole on the barrel, catching the employee's shirt on fire. The employee sustained burns to their abdomen and chest, requiring hospitalization.

DC Power Tong, LLC

An employee was removing tubing caps and cleaning tubing ends with solvent. Their flame-resistant pants became soaked with the cleaning solvent and were ignited by a propane torch used for removing tubing caps. The employee was hospitalized with burns to their legs.

Ahresty Wilmington Corporation

A maintenance technician was investigating a tool issue. He was pressing the tool clamp/unclamp button with his right hand when his hand slipped off the button, causing the spindle to clamp on his distal left index finger, resulting in amputation.

US Aluminum Inc

An employee had just fixed a loose aluminum coil on a rack while raised about 11 feet into the air on a forklift. While he was being lowered, he fell from the forks to the floor, suffering two fractured ribs, a punctured lung, and a fractured cervical vertebra. He was hospitalized.

Golden Aluminum, Inc.

An employee was troubleshooting a caster machine. While removing a cap cover, the catch pan moved up and caught his right arm against the caster blocks. He suffered lacerations and an open break of the ulna. He was hospitalized.

Reynolds Consumer Products LLC

At 11:27 a.m. on March 15, 2025, an employee was transferring film to start a new roll when the winder shaft failed to seat properly in its cradle. The employee was knocking the unseated shaft down when his right thumb was caught. The employee sustained an amputation to right thumb.

Steel Dynamics - Southwest - Sinton Division

Two employees were riding in a utility terrain vehicle down a loose gravel path. The vehicle's front wheel dug into the gravel, and it rolled over onto its side. The injured employee struck the interior of the vehicle (including the steering wheel) before landing on the driver. The injured employee suffered a 6-inch head laceration, a broken collarbone, and six broken ribs.

Main Line Clinical Labs

An employee was closing a door when the door closed on their right index finger, resulting in a fingertip amputation.

Ardent Mills

An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.

Zimmerman & Herr

An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.

McAneny Brothers, Inc.

An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.

Metz Culinary Management LLC

An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.