Vehicle or machinery fire · Third or fourth degree heat (thermal) burns
At a glance
Federal OSHA recorded a severe workplace injury
at ESCO Corporation, 9098 Eastside Drive Ext., NEWTON, MISSISSIPPI 39345
on — Third or fourth degree heat (thermal) burns, affecting the arm(s), unspecified.
Watch Esco Corporation — freeGet an email when a new federal OSHA severe-injury report for Esco Corporation is published. One employer, no account, unsubscribe in one click.
Final narrative
On 4/26/16, at approximately 5:15 AM, an employee was using a pneumatic chipping gun to break up hardened mortar inside the mortar mixer. When he connected his chipping gun's quick-connect hose to the airline, he accidentally hooked it to an oxygen line, which was not properly labeled. While he was operating the chipping gun with oxygen instead of compressed air, a fire broke out inside the tool and enveloped his right arm, face, and neck. He suffered second and third degree burns to his arm, and first and second degree burns to his face and neck, requiring hospitalization.
On June 16, 2017, an employee was preparing to replace a drill bit on a multi-spindle drill press when his left ring finger contacted the point of operation and was amputated.
The wiring for an argon oxygen decarburization (AOD) motor caught fire and the AOD had to be operated manually. An employee attempted to insert a crank handle into the AOD crank. As the employee was manually tilting the AOD, it moved beyond the center of gravity and the crank handle started spinning rapidly. When the employee tried to grab the crank handle, his right middle finger was caught in the chain and sprocket, de-gloving the fingertip. The chain and sprocket was unguarded at the time of the incident.
An employee was using a jib crane to lower a mold onto a carrier that had a bolt laying on top of it. When the employee attempted to pull the bolt from beneath the mold, it dropped down and smashed his left middle finger between the mold and carrier. His left middle fingertip was partially amputated.
An employee removed the spark plugs and was rotating an engine to evacuate condensate from the cylinders. An unknown source ignited the condensate and natural gas. The employee sustained burns to the back of his hands and upper leg area.
An employee was operating a front-end loader when a hydraulic line broke, causing the front-end loader to catch on fire. The employee jumped from the cab to the ground and sustained fractures to the T-6 vertebra and a heel.
An employee was moving two totes of turpentine. Noticing that one of them was leaking, he stopped his forklift and began to look for the leak. The forklift caught fire, and the employee suffered severe burns. He was hospitalized.
An employee was performing maintenance on a machine when part of an adjacent machine caught fire. The employee extinguished the fire and suffered smoke inhalation.
More severe injuries in this industry (NAICS 331513)
An employee was unloading metal from two drums on a pallet. The employee removed the lid from the second drum and the drum fell over onto his ankle. The employee sustained a fractured ankle.
An employee was working with team members on the pouring line, casting a sand mold. Molten metal entered the employee's personal protection suit and severely burned his left leg, calf, and ankle.
An employee was jointing a board with a jointer. The board jumped when it came into contact with the jointer's cutter head, and the jolt caused the employee's left hand to slide between the board and the guard and come into contact with the cutter head. He suffered lacerations/partial amputations to the middle, ring, and index fingers.
An employee was turning off a gas valve when he bumped into a die brush and struck the spinning die. The die pin struck him on the back, resulting in contusions, abrasions, and a severe laceration to his back that required hospitalization and surgery.
At 11:45 a.m. on June 13, 2025, an employee of Staley Steel, LLC, was performing preventive maintenance on an overhead crane. While he was holding a grease gun hose and nozzle, he contacted electrical components inside an electrical box. He suffered a first-degree electrical burn on the palm of the left hand, as well as pain up his left arm to the shoulder, and was hospitalized.
An employee was checking a pole-type transformer tank for leaks. A hydraulic clamping device was lowered onto his right thumb and crushed it against the sharp edge of the bottom of the tank. He suffered a partial transphalangeal amputation to the thumb.
The injured employee was standing behind a table. She jumped out to scare another employee, but tripped and fell on the tile floor, injuring her right ankle/foot. She was hospitalized with a dislocated ankle that required surgery.
An employee was going into a trailer to mark product for shipment and the trailer pulled away from the dock. The employee fell out of the trailer, contacted the dock plate, and then fell to the ground. The employee was hospitalized with a punctured lung, fractured ribs, and contusions.
An employee was hooking up bundled tie-downs with a chain. While he was holding a hook, the other hook was unlocked. This caused the employee's hook to slide down and pinch his right index finger between the chain and the shackle. He suffered an amputation to the fingertip (without bone loss), as well as an open fracture.
An employee was operating a gas tugger to lift metal sheeting. His left hand was pulled into the pulley, which crushed his left thumb, resulting in avulsions and other tissue damage. He was hospitalized and required surgery.