CALVERT, ALABAMA—
Outokumpu Stainless USA, LLC.
Compressed or pinched by shifting objects or equipment · Fractures
At a glance
Federal OSHA recorded a severe workplace injury at Outokumpu Stainless USA, LLC., 1 Steel Drive, CALVERT, ALABAMA 36513 on — Fractures, affecting the chest, except internal location of diseases or disorders.
Final narrative
An employee was assisting the crane operator with the four way rigging to a crop bucket for removal at the melt shop area of the plant and was caught between the lifting device and the hand rail resulting in three fractured ribs on the right side.
More severe injuries at Outokumpu Stainless USA, LLC.
CALVERT, ALABAMA—
Outokumpu Stainless USA LLC
An employee replaced a hydraulic hose on a hydraulic cylinder that is used to close the furnace doors. The employee was testing the machine and went to adjust or fix the hose when his right arm was caught between the cylinder and the frame of the furnace. The employee was hospitalized with a fractured distal ulnar shaft.
CALVERT, ALABAMA—
Outokumpu Stainless USA, LLC.
An employee was removing a dozer pump and motor. As the employee was removing the bolts, the employee's hip contacted the drain line, which broke and released hydrofluoric acid. The acid burned the employee's right calf where the chemical suit had ridden up.
CALVERT, ALABAMA—
Outokumpu Stainless USA, LLC.
An employee was sitting in the cab of a forklift while fueling the lift. The fuel started to overflow so the employee exited the cab and slipped and fell 3 feet to the cement. She landed on and fractured her ankle.
CALVERT, ALABAMA—
Outokumpu Stainless USA, LLC.
An employee was helping straighten out steel coils. Bands were in place to hold the coils; a hold-down bar was about to be lowered so that pressure could be applied to a coil and the bands would be further tightened. The bar was lowered while the employee's right hand was on top of the coil. His index fingertip was caught between the coil and the bar, resulting in an amputation.
CALVERT, ALABAMA—
Outokumpu Stainless USA, LLC
An employee was lacing using an oxygen lancer. Concrete was heated by the lance and metal slag shot into the air and contacted the injured employee. The employee sustained burns to the left foot and right hand.
View Outokumpu Stainless USA, LLC.'s full OSHA safety record →
Similar incidents · Same event type
MECHANICSBURG, PENNSYLVANIA—
TForce Freight
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
DELAWARE CITY, DELAWARE—
Liveo Research, Inc.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
FORT WORTH, TEXAS—
Best Pump and Flow
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
BUFFALO, NEW YORK—
FORD MOTOR COMPANY
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
UNADILLA, GEORGIA—
Lasseter Tractor Company. Inc.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 331513)
BATH, PENNSYLVANIA—
Effort Foundry, Inc.
An employee was unloading metal from two drums on a pallet. The employee removed the lid from the second drum and the drum fell over onto his ankle. The employee sustained a fractured ankle.
BATH, PENNSYLVANIA—
Effort Foundry, Inc.
An employee was working with team members on the pouring line, casting a sand mold. Molten metal entered the employee's personal protection suit and severely burned his left leg, calf, and ankle.
PEWAUKEE, WISCONSIN—
Northern Stainless Corporation
An employee was jointing a board with a jointer. The board jumped when it came into contact with the jointer's cutter head, and the jolt caused the employee's left hand to slide between the board and the guard and come into contact with the cutter head. He suffered lacerations/partial amputations to the middle, ring, and index fingers.
WAUKESHA, WISCONSIN—
MetalTek International, Inc.
An employee was turning off a gas valve when he bumped into a die brush and struck the spinning die. The die pin struck him on the back, resulting in contusions, abrasions, and a severe laceration to his back that required hospitalization and surgery.
PILOT POINT, TEXAS—
Staley Steel LLC
At 11:45 a.m. on June 13, 2025, an employee of Staley Steel, LLC, was performing preventive maintenance on an overhead crane. While he was holding a grease gun hose and nozzle, he contacted electrical components inside an electrical box. He suffered a first-degree electrical burn on the palm of the left hand, as well as pain up his left arm to the shoulder, and was hospitalized.
More severe injuries in ALABAMA
GENEVA, ALABAMA—
Sysco Gulf Coast, LLC
An employee was traveling down the maintenance aisle of a warehouse on a single-pallet front rider jack. The jack malfunctioned, causing the brakes to apply; the employee fell forward onto the concrete warehouse floor. The employee suffered an injury to the left leg and was hospitalized, requiring surgery.
BESSEMER, ALABAMA—
Norflex, Inc.
An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.
ANNISTON, ALABAMA—
Ampler Pizza II LLC
An employee was shot in the leg with a pistol during an altercation with two people who had entered the store without permission.
ATMORE, ALABAMA—
Birdsong Corporation
An employee was directing a truck driver to a dump site when the truck's peanut trailer slipped off the kingpin. As the trailer fell, a ladder attached to it lacerated the employee's ear. The employee was hospitalized.
ROGERSVILLE, ALABAMA—
Pilgrims
An employee was unloading a forklift from a trailer to the ground. The employee was climbing down the ladder of the trailer when their foot slipped through one of the rungs, causing them to fall backward onto the forklift forks. The employee was hospitalized for fractured ribs.