North American Lighting, Inc.

An employee was retrieving empty plastic totes from a material storage area. The totes weighed 7.5 pounds and measured 15 inches in width, 24 inches in length, and 7 inches in height. The employee tripped over conveyor rails and fell on his left side onto the concrete floor, resulting in hospitalization with a ruptured quadricep tendon in his right knee.

On July 22, 2024, at approximately 11:15 AM, an employee was moving an air conditioning unit on the roof when their right middle finger became caught between the bottom of the unit's frame and the roof curb frame. The employee sustained an amputation to the fingertip.

On July 18, 2024, at 1:09 a.m. in the receiving dock area an employee was pushing a trash can toward the compactor as a forklift was operating in reverse. The forklift struck the employee's left foot causing three toe fractures, including an open fracture of the big toe. The injured employee was hospitalized.

At about 3:00 a.m. on November 14, 2020, an employee was checking a molding machine containing seized-up material. As he opened the machine's door and looked down, the molding material gassed off and blew into his face. He suffered facial burns, as well as splatters on the neck and hands, and was hospitalized,

An employee walked to the back of the assembly line to sign off on the completion of the fail-safe process. When they were returning to the front side of the assembly line, the employee stepped inside the frame of a finished goods cart and tripped, striking their head and right shoulder against the cart and the floor. The employee was hospitalized with a head laceration and a dislocated right shoulder.

An employee was lifting a motor and reaching to place it on a machine when they sustained a back injury. The employee was hospitalized.

On 12/22/2023, an employee was carrying bins filled with pasta to a refrigerator. As he lifted a 20-pound bin, he felt pain in his lower back. The employee sustained a herniated disc.

An employee was lifting a patient when they pulled a back muscle. She suffered back pain and spasms radiating into her leg with weakness and numbness. The employee's L3-L4 disc was herniated and she was hospitalized.

An employee was lifting boxes when they suffered a strained back, resulting in hospitalization.

An employee was lifting a bundle of insulation with a colleague when he felt severe pain in the right side of his lower back/hip region. The employee sustained a severe muscle injury.

An employee was making repairs to a milling machine located in the mold shop. While using a screwdriver to make adjustments, the machine energized and struck the employee. The employee's right arm was fractured.

An employee was breaking down dunnage to prepare totes and trays to go through a tote washer. A tow motor driver asked the employee to move a cart that was in the way so the tow motor could remove a gaylord. The employee moved the cart and then stepped away from the tow motor. As the employee moved to an area between carts, his right foot got caught by a cart, causing him to twist and fall on top of a cart, landing on the left flank of his torso. The employee suffered a hemorrhage on his left flank.

An employee tripped over a computer cord and fell fracturing their femur.

Three employees were installing a transfer rail in a press. There were two employees holding the rail and the injured employee was at the end of the rail guiding the rail into the bracket. The task was done manually with no mechanical equipment. The employee had their finger at the end of the rail and went to make sure the rail was lined up while the other two employees pushed it into the bracket, causing their finger to become pinched between the rail and bracket. The employee's middle fingertip was amputated. Protective gloves were worn at the time of the incident.

An employee was walking across the dock, interacting with forklift drivers on what was being loaded. A forklift drove forward with a tall load on the forks. The employee was struck by the load (running board/rocker panel rack) on the forklift. The employee sustained several contusions and an injury to their right Achilles tendon that required surgery.

An employee fell while moving a water canister, resulting in fractures to four fingers on her right hand.

An employee was changing a die in a press when the die slipped and crushed the employee's left index finger. The employee sustained an open facture of the tuft of the left distal phalanx and a partial amputation.

An employee was mixing sauce using a sauce barrel mixer when his left little finger was amputated.

An employee was driving a boom lift (in the lowered position) in an exterior dock area. The lift s left wheels rolled onto base plates that covered a 3-foot-deep sump pit. The base plates failed, and one side of the lift dropped. The employee's left leg was caught under the lift basket, and he suffered a fracture to the lower leg including the ankle.

A temporary employee was carrying a nail gun through the warehouse when it hit his leg, activated, and fired a nail into the leg.