Compressed or pinched by shifting objects or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Pactiv LLC, 7200 S. Mason, BEDFORD PARK, ILLINOIS 60638
on — Amputations, affecting the fingertip(s).
Final narrative
Two employees were mounting a metal rod on a workbench mounted vice. The metal rod slipped from the vice and struck the tip of one employee's right ring finger causing a fingertip amputation.
AmputationFingertip(s)Bars, rods, reinforcing bar (rebar)
An employee jumped up on the concrete floor to retrieve an empty 5-gallon bucket from on top of a storage cabinet. When he landed, his right femur fractured.
On January 6, 2025, at approximately 11:56 PM, an employee was clearing products from the packing table of a trim press when their left middle finger came in contact with the die. The employee sustained amputation of their left middle finger pad.
An employee was removing plastic shards from a machine using a compressed air hose. She stepped on the guardrail to gain better access to the accumulated plastic and her hair was caught in the rotating canopy drive shaft. The employee suffered hair loss and scalp damage. The machine was not guarded at the time.
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 326111)
At about 11:00 a.m. on August 17, 2025, a Sealer Air Corp. employee suffered a broken right tibia while stepping down from a conveyor to the floor 19 inches below.
An employee was troubleshooting around the secondary draw rollers of a bag machine when their left index, middle, and ring fingers contacted the rollers. The employee sustained a partial fingertip amputation to one of the fingers. The machine was not guarded at the time.
An employee was clearing a jam from the rewinder when their hand was pulled into a rotating part of the machine, fracturing one finger and dislocating another.
An employee was stepping down from a two-step ladder when the ladder slipped out from underneath them. The employee fell and landed on a sidekick trailer jack, resulting in four fractured ribs, including two ribs with multiple breaks, and a pulmonary contusion.
An employee was changing a die in a press when the die slipped and crushed the employee's left index finger. The employee sustained an open facture of the tuft of the left distal phalanx and a partial amputation.
An employee was driving a boom lift (in the lowered position) in an exterior dock area. The lift s left wheels rolled onto base plates that covered a 3-foot-deep sump pit. The base plates failed, and one side of the lift dropped. The employee's left leg was caught under the lift basket, and he suffered a fracture to the lower leg including the ankle.